Sony TCD-D8 Setting the Clock, To select either the 12-hour or 24-hour clock display, Tip

Setting the Clock

Set the clock before starting any recording operations to stamp the date and time. Otherwise, you cannot get the correct date and time.

The clock will return to its default setting (SU/95Y1M1D/ AM12H00M00S) if the batteries are removed from the unit for one hour or more. In this case, set the clock again.

CLOCK/SET

– +

Inserting the Batteries/Setting

Make sure that the tape-corder is in the stop mode when the cassette is inserted, and that the Hold function is disabled.

1	Press the CLOCK/SET button for
SET	more than four seconds.
CLOCK
2	Press + or – button to set the
	current year, then press the
	CLOCK/SET button.
COUNTER	RESET

3	Repeat step 2 to set the current
SET	month, date, day, hour, minute,
	and second.

The display stops flashing and the clock operates.

the Clock

Tip

To set the clock accurately, set the second to 00 with the + or – button, and then press the CLOCK/SET button at the time of the tone.

To select either the 12-hour or 24-hour clock display

Press the + button for 2 seconds or more.

To quit the clock setting

Press the STOP p button. The clock display will return to the previous clock setting. However, if the day is set , the year, month, date and day will be set and will not be applicable for further cancellation.

Setting the Clock

5EN