Sony TCD-D8 operating instructions 32EN

Page 32

Problem	Cause	Solution

Noise is heard in the	This is not a malfuntion. (See	——
monitor sound when	page 18).
recording with an
equipment connected
via the digital
connection.

The volume cannot be The PHONES (AVLS)/LINE

adjusted.

OUT switch is set to LINE OUT.

Stop recording/playback or disconnect the headphones from the unit. Then, set the switch to PHONES (AVLS).

The PHONES (AVLS)/LINE OUT switch of this unit is set to

2AVLS ON.

Set the switch to 2 AVLS OFF.

	The HOLD/PUSH OPEN	Slide the switch to the center
	switch is set to HOLD.	position.
The clock displays SU/	The batteries are removed from	Set the clock again. (See page 5.)
95Y1M1D/	the unit for one hour or more.
AM12H00M00S.
Neither Start ID nor	The record-protect shutter on	Close the shutter on the cassette.
PGM number can be	the cassette is open.	(See page 7.)
written.

The Start ID is	When recording on a partially	When recording on a partially
written, but the PGM	recorded tape, the most recent	recorded tape, display the PGM
number is not	PGM number is not displayed	number before commencing
written.	before recording.	recording.

Operation buttons do	While the Start ID is being	Press the buttons after the
not work while the	written, none of the buttons	indicator has stopped
Start ID is being	except STOP p can be used.	flashing.
written.

Absolute time cannot	Recording has been started
be written.	from a blank segment of the
	tape.

Rewind the tape to the beginning, locate the end of the previous recording and start recording from that point. (See page 8.)

The sound picked up by the microphone is distorted.

The sound source is too loud.

Set MIC SENS switch to L.

Noise occurs during When monitoring the recording

recording.sound with headphones or external speakers, they are placed too close to the microphone.

Keep the microphone away from them.


The tape stops suddenly	There is a blank (unrecorded)			——
during playback.	part on the tape.
The cassette	Power source is disconnected			Connect the power source and
compartment lid	from the unit while “		” or	close the lid.
cannot be closed.
	“	” is flashing in the

display.

32EN

Additional Information

Image 32

Contents Digital Audio Tape-corder OWNER’S Record WelcomeTable of contents Battery compartment lid Insert from the ’ side BatteryInserting the Batteries Lift the tab ¢ PullSetting the Clock To quit the clock settingClock To select either the 12-hour or 24-hour clock displayWindow facing up Inserting the CassetteCassette compartment lid To eject the cassette To protect your recordingTo prevent accidental operations Inserting the CassetteRecording Locating the point at which to begin recordingTo record from the beginning of the tape To record on a partially recorded tapeWhen - flashes for the program number REC Mode switchRecording from a microphone Program number10EN Other operationsTips PressTo record relatively low sound Choosing microphones for better recording11EN Compatible microphonesConnect firmly To PHONES/LINE OUT Playing Back12EN Playing Back 13ENTo fast-forward/rewind while monitoring the sound To high speed cue/review14EN To check the sampling frequencyDisplay during fast-forward/rewind AMS function Tape transport direction Remaining amount of tapeConnecting with Other Equipment for Recording Recording from analog audio equipment Analog connection15EN RecordingSource Sampling frequency 16ENSource and sampling frequency for recording Adjusting the recording level manually- Manual recording ToPHONES HeadphonesUseful Recording Functions Recording in the Long Play mode-LP RECTape counter display during LP mode Recording blank segment-REC MuteMonitoring the recording 18ENWriting Start ID Writing Start ID during recording19EN Stop pWriting Start ID when AUTO-ID is turned on Writing Start ID when AUTO-ID is turned off20EN Source Start ID is written whenTo adjust the selected point Writing Start ID during playbackErasing Start ID 21ENWhen recording from the beginning of the tape When recording from the halfway of the tapeAssigning Program Number 22ENConnecting with Other Equipment for Playback Playback with an analog audio equipment Analog connection23EN PlaybackUsing Avls function Avls switch Volume and displayUseful Playback Functions 24ENPower Replacing the batteriesSources 25EN26EN Low-power Consumption ModeTo enter the low-power consumption mode manually Operating with the AC Power Adaptor or Car Battery Using the AC power adaptorUsing the car battery 27ENConnecting with Other Equipment Using the optional system adaptor kit RM- D3KUsing the optional super bit mapping adaptor SBM-1 28ENSerial Copy Management System Scms Information29EN AdditionalMessageDescription Message Display30EN Troubleshooting 31EN32EN Precautions 33ENMaintenance Cleaning the CabinetCleaning the Head Using the supplied cleaning cassetteSpecifications 35ENSupplied accessories Optional accessoriesWarranty information For the Customers who Purchased the Sony World Model37EN Location and Function of ControlsAdditional 38EN Display window 39ENUsing the display To reset the tape counter normal display to 0H00M00S40EN Tape counter displayMessage display 41ENClock display Remarques sur l’enregistrement BienvenueTable des matières EnregistrementLecture Sources d’alimentationMise en place des piles Couvercle du logement des pilesSoulevez le taquet ¢ Pull Insérez le côté ’ de la Pile en premierRéglage de l’horloge Mise en place desPiles/Réglage de l’horloge Pour quitter le réglage de l’horlogeIntroduction d’une cassette Couvercle du logement de cassetteAppuyez et poussez Fenêtre tournée vers le hautEjection de la cassette Introduction d’uneProtection des enregistrements importants Pour éviter toute manipulation accidentelleEnregistrement Recherche du point où l’enregistrement doit commencerEnregistrement depuis le début de la bande Enregistrement sur une bande partiellement enregistréeCommutateur Enregistrement à partir d’un microphoneSi - clignote pour le numéro de programme Autres opérations 10FConseils Pour Appuyez surEnregistrement d’un son relativement faible Choix du microphone pour obtenir un meilleur enregistrementMicrophones compatibles 11FBranchez à fond Vers PHONES/LINE OUT Lecture12F Recherche du début d’un programme d’une Plage-Fonction AMS Avance rapide/rebobinage pendant un contrôle audioRepérage/revue à grande vitesse 14F Vérification de la fréquence d’échantillonnageAffichage pendant une avance rapide/rebobinage Fonction AMS Sens du défilement de la bande Quantité de bande restanteEnregistrement Connexion à un autre appareil en vue d’un enregistrement15F Source Fréquence ’échantillonnage 16FSource et fréquence d’échantillonnage pour l’enregistrement Enregistrement en mode longue durée-LP Fonctions d’enregistrement pratiquesVers Casque, enceintes actives, etcAffichage du compteur de bande en mode LP Enregistrement d’un espace blanc-REC MuteContrôle de l’enregistrement 18F19F Inscription d’un ID code d’identification de départInscription d’un ID de départ pendant l’enregistrement 20F Source Un ID de départ s’inscrit quandInscription d’un ID de départ pendant la lecture Effacement des ID de départ21F Réglage du point d’inscriptionAttribution d’un numéro de programme 22FEnregistrement à partir du milieu de la bande Renumérotation des numéros de programmeConnexion à un autre appareil en vue de la lecture 23FLecture Vers Remote Digital I/OCommutateur Avls Volume et affichage Fonctions de lecture pratiquesUtilisation de la fonction Avls 24F25F Remplacement des piles’alimentation 26F Mode économiquePour commuter manuellement en mode économique Remarques sur l’adaptateur d’alimentation secteur 27FUtilisation de l’adaptateur d’alimentation secteur Utilisation d’une batterie de voitureConnexion à un autre appareil Utilisation du kit d’adaptation de système RM-D3K en optionUtilisation du processeur super bit mapping en option SBM-1 28F29F Système de protection de copie abusive ScmsSupplémentaire Affichage des messages 30FGuide de dépannage 31FVolume 32FPrécautions Entretien 34FSpécifications 35FAccessoires fournis Accessoires en optionPour les clients qui ont acheté le modèle Sony mondial 36FEmplacement et fonctions des commandes 37F38F Fenêtre d’affichage 39FUtilisation de l’affichage 40FAffichage du compteur de bande Réinitialisation du compteur affichage normal sur 0H00M00SAffichage des messages 41FAffichage de l’horloge