Use of 12V Outlet
Note: Do not insert any device that pulls more than 1 Amp or else the fuse will open. 12V outlet will not operate from battery pack.
1.Lift the rubber lid marked with 12V of the jack and insert the plug of the device or the appliance.
2.Close the lid as soon as you finish using the outlet to prevent any other things from entering the jack.
3.If no power is available then check fuse.
Changing fuse
1.Unscrew fuse cap in counterclockwise direction.
2.Replace fuse. Replace only with a metric 5x20mm fast acting 1 Amp fuse (F1AL 250V).
AUX 1 IN
LINE OUT
12V
AUX 1 |
|
IN | LINE |
| |
| OUT |
SD | 250V |
/ | 1AMP |
MMC | FOR 12V |
| FUSE |
| OUTLET |
| USB |
3. Tighten fuse cap assembly in clockwise direction.
Do not bypass the fuse or use any other fuse except what is specified, as it may
cause damage to the unit.
Changing Clock Batteries
1.Open battery bay door.
2.Remove AA battery cover.
3.Remove old batteries and dispose of properly.
4.Insert new AA batteries. Do not use mismatched batteries, use only new Alkaline batteries.
LOCATION OF AA
BATTERIES
REPLACE AA BATTERY
WHEN UNIT NO LONGER
KEEPS CORRECT TIME
|
| Trouble Shooting Guide | ||
|
|
| ||
Problem | Checkpoint | Remedy | ||
|
|
|
|
|
Audio Unit doesn’t | 1. | Is power cord properly connected ? | 1. | Plug in AC power cord. |
function. | 2. | Is the Bosch battery pack installed or | 2. | Make sure battery is completely inserted. |
| ||||
| inserted properly? |
|
| |
| 3. | Does the battery need charging? | 3. | Plug in power cord and insert battery. |
|
|
|
|
|
It is noisy or weak | 1. | Is there any facility interfering with | 1. | Move unit to new location away from |
in radio receiving. | the unit. | interference. | ||
| 2. | Is there any interference to the | 2. | Turn the unit in different directions. |
| internal FM antenna? |
|
| |
|
|
|
|
|
12V DC outlet | 1. | Is 1 amp fuse properly inserted? | 1. | Insert 1 amp fuse. |
doesn’t function | 2. | Has the 1 amp fuse blown open? | 2. | Replace fuse. |
|
|
|
|
|
1. | Is power cord properly connected? | 1. | Plug in AC power cord. | |
does not function | 2. | Is green light illuminated on outlets? |
|
|
|
|
| ||
|
|
|
|
|
Does unit suddenly | 1. | Is power cord properly connected | 1. | Plug in power to unit. |
fail to work | to unit? |
|
| |
| 2. | Is the LCD displaying that there is | 2. | Software in unit needs to be reset. Remove all |
| power to the unit? | batteries from unit and unplug AC power cord, wait | ||
|
|
| for 30 seconds and reconnect AC power cord. | |
|
|
|
|
|
12