Return to Section TOC
Return to Section TOC
Return to Section TOC
Return to Section TOC
Return to Master TOC
Return to Master TOC
Return to Master TOC
Return to Master TOC
OPERATION | ||
| ||
|
|
|
“ | RANGE” SWITCH |
|
The “Range” switch is used to select one of three amperage ranges with generous overlap for Stick/TIG welding, or one Wire Feed welding range.
Process | Range Setting | Current Range |
|
|
|
STICK/TIG | 90 Max. | 50 to 90 Amps |
(constant current) | 145 Max. | 70 to 145 Amps |
(3 range settings) | 210DC/225AC Max. | 120 to 210 (DC) 225(AC) |
|
|
|
WIRE FEED |
|
|
(constant voltage) | 15 to 25V | Up to 200 Amps |
(one range setting) |
|
|
|
|
|
CAUTION
Never change the “RANGE” Switch setting while welding. This will damage the switch.
“ 
CONTROL” DIAL
Provides a fine welding current adjustment within the Range Switch settings in the STICK mode and welding voltage control with the Range switch set in the wire feed mode.
POLARITY SWITCH
Provides three selectable welding polarities:
AC, DC+ & DC-
CAUTION
Never change the Polarity switch setting while welding.
This will damage the switch.
RANGER® 3 PHASE APPROXIMATE FUEL CONSUMPTION
| KOHLER |
| CH20S or CH23S |
|
|
Low Idle - No Load | .35 Gallons/Hour |
2200 RPM | (1.34 Liters/Hour) |
High Idle - No Load | .76 Gallons/Hour |
3700 RPM | (2.86 Liters/Hour) |
AC CC Weld Output | 1.23 Gallons/Hour |
225 Amps @ 25 Volts | (4.64 Liters/Hour) |
DC CC Weld Output | 1.38 Gallons/Hour |
210 Amps @ 25 Volts | (5.21 Liters/Hour) |
DC CV Weld Output | 1.22 Gallons/Hour |
200 Amps @ 20 Volts | (4.60 Liters/Hour) |
Auxiliary Power Single Phase | 1.52 Gallons/Hour) |
9,500 Watts | (5.77 Liters/Hour) |
Auxiliary Power 3 Phase | 1.64Gallons/Hour) |
10,500 Watts | (6.23 Liters/Hour) |
|
|