Lincoln Electric IM10044 manual Installation

A-1				INSTALLATION				A-1
TECHNICAL SPECIFICATIONS - VANTAGE® 575 CUMMINS (K2170-2)
				INPUT - DIESEL ENGINE
Make/Model	Description			Speed (RPM)	Displacement	Starting		Capacities
					cu. in. (ltrs.)	System
	4 cylinder			High Idle 1590	199(3.3)	12VDC Battery &		Fuel: 25 gal.
Cummins	48 HP (36kw)					starter		(94.6 L)
B3.3	1500 RPM			Full Load 1500	Bore x Stroke inch (mm)			Oil: 2 gal. (7.5L)
	Diesel Engine
				Low Idle 1300	3.74 X 4.53			Radiator Coolant:
					(95 x 115mm)			2.6gal. (9.8L)
		RATED OUTPUT @ 104°F(40°C) - WELDER
Duty Cycle			Welding Output			Volts at Rated Amps
100%			450 Amps (DC multi-purpose)				38 Volts
60%			500 Amps (DC multi-purpose)				40 volts
	OUTPUT @ 104°F(40°C) - WELDER AND GENERATOR
				Welding Range
				30 - 575 Amps CC/CV
				20 - 250 Amps TIG
				Open Circuit Voltage
				60 Max OCV @ 1590 RPM
				Auxiliary Power (1) (50 Hz)
	Outlets x Phase			Voltage	Power	Amps
		1 x 3ph		415 Volts	20 Kva	32 Amps
		2 x 1ph		240 Volts	7.2 Kva	15 Amps
				PHYSICAL DIMENSIONS
Height (2)			Width		Depth		Weight
42.0 in			32.7 in.		63.1 in.		1625 lbs.
(1066.8 mm)			(830.1mm)		(1603mm)		(737kg)
							(Approx)

1.Output rating in watts is equivalent to volt-amperes at unity power factor.

Output voltage is within +/- 10% at all loads up to rated capacity. When welding, available auxiliary power will be reduced.

2.Top of Enclosure, add 7.0” (177.8mm) for exhaust pipe.

VANTAGE® 575 CUMMINS