Albatron Technology ARM11/Cortex-A8 user manual Configuration File

bdiGDB for GNU Debugger, BDI2000 (ARM11/Cortex-A8) User Manual 23

3.2 Configuration File

The configuration file is automatically read by the BDI2000 after every power on. The syntax of this file is as follows:

;comment

[part name]

core# identifier parameter1 parameter2 ..... parameterN ; comment core# identifier parameter1 parameter2 ..... parameterN

.....

[part name]

core# identifier parameter1 parameter2 ..... parameterN core# identifier parameter1 parameter2 ..... parameterN

.....

etc.

Numeric parameters can be entered as decimal (e.g. 700) or as hexadecimal (0x80000).

The core# is optional. If not present the BDI assume core #0. See also chapter "Multi-Core Support".

© Copyright 1997-2007 by ABATRON AG Switzerland V 1.04