Contents | 2) Electrical safety |
Safety rules Technical data Symbols Functional description
Use for intended purpose Electrical connection and operation
Extension cord
Tool settings
Electronic control
Pendulum stroke
Adjusting the base runner
Fitting the splinterguard
Fitting the chip guard
The chip extractor
Adjusting the sawblade guide
Changing the sawblade
Working with the tool
Metalworking
Free hand according to the scribe mark Plunge cutting without pilot drilling
Accessories, tools
Festool guide system FS
Parallel guide
Circle cutter
Systainer
Other accessories, saw blades
2a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use
3any adapter plugs with earthed (grounded)
3power tools. Unmodified plugs and matching
4outlets will reduce risk of electric shock.
4 | b) Avoid body contact with earthed or | |
4 | grounded surfaces such as pipes, radiators, | |
ranges and refrigerators. There is an increased | ||
4 | ||
risk of electric shock if your body is earthed or | ||
4 | ||
grounded. | ||
4 | ||
c) Do not expose power tools to rain or wet | ||
5 | ||
conditions. Water entering a power tool will in- | ||
5 | crease the risk of electric shock. | |
5 | d) Do not abuse the cord. Never use the cord | |
5 | for carrying, pulling or unplugging the power | |
6 | tool. Keep cord away from heat, oil, sharp | |
edges or moving parts. Damaged or entangled | ||
6 | ||
cords increase the risk of electric shock. | ||
6 | ||
e) When operating a power tool outdoors, | ||
6 | ||
use an extension cord suitable for outdoor | ||
6 | use. Use of a cord suitable for outdoor use reduces | |
6 | the risk of electric shock. | |
6 | f) Hold power tool by insulated gripping sur- | |
7 | faces only, when performing an operation | |
7 | where the cutting accessory may contact |
7 | hidden wiring or its own cord. Contact with a | |
„live“ wire will make exposed metal parts of the | ||
|
7power tool „live“ and shock the operator.
83) Personal safety
Maintenance and care
Warranty
Safety rules
Read and understand all instruc- tions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS
General safety rules
1)Work area safety
a)Keep work area clean and well lit. Cluttered and dark areas invite accidents.
b)Do not operate power tools in explo- sive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
c)Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
a)Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious per- sonal injury.
b)Use safety equipment. Always wear eye protection. Safety equipment such as dust mask,
c)Avoid accidental starting. Ensure the switch is in the off position before plugging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents.
d)Remove any adjusting key or wrench be- fore turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
e)Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
2