Panasonic EY7440 operating instructions IV. Assembly, Attaching or Removing Bit

Page 6

cordless tool or battery pack with this charger.

13)Do not attempt to charge the battery pack with any other charger.

14)Do not attempt to disassemble the battery pack housing.

15)Do not store the tool and battery pack in locations where the temperature may reach or exceed 50°C (122°F) (such as a metal tool shed, or a car in the summer), which can lead to deterioration of the storage battery.

16)Do not charge battery pack when the temperature is BELOW 0°C (32°F) or ABOVE 40°C (104°F). This is very important in order to maintain optimal condition of the battery pack.

17)Do not incinerate the battery pack. It can explode in a fire.

18)Avoid dangerous environment. Do not use charger in damp or wet locations.

19)The charger is designed to operate on standard household electrical power only. Do not attempt to use it on any other voltage!

20)Do not abuse cord. Never carry charger by cord or yank it to disconnect from outlet. Keep cord away from heat, oil and sharp edges.

21)Charge the battery pack in a well ven­ tilated place, do not cover the charger and battery pack with a cloth, etc., while charging.

22)Use of an attachment not recommend­ ed may result in a risk of fire, electric shock, or personal injury.

23)Do not short the battery pack. A battery short can cause a large current flow, over heating and create the risk of fire or personal injury.

24)NOTE: If the supply cord of this ap­ pliance is damaged, it must only be re- placed by a repair shop authorized by the manufacturer, because special pur- pose tools are required.

25)TO REDUCE THE RISK OF ELECTRIC SHOCK, THIS APPLIANCE HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN THE OTHER).

This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.

IV. ASSEMBLY

Attaching or Removing Bit

NOTE:

When attaching or removing a bit, disconnect battery pack from tool or place the switch in the center position (switch lock).

This tool is equipped with a keyless drill chuck.

1.Attachment

Insert the bit and turn the lock col- lar clockwise (looking from the front) to tighten firmly until it stops clicking.

Lock collar

2.Removal

Turn the lock collar counterclockwise (looking from the front), then remove the bit.

NOTE:

If excessive play occurs in the chuck, secure the drill in place and open the chuck jaws by turn- ing the lock collar and tighten the screw (left-handed screw) with a screwdriver by turning it counter­

clockwise (viewed from the front).

- -

Image 6
Contents Model No EY7440 ImportanteEnglish Français Español Página Personal Safety Work Area SafetyElectrical Safety Power Tool Use and CareBattery Tool Use and Care ServiceII. Specific SAFE­ TY Rules III. for Battery Charger & Battery Pack Important Safety InstructionsSymbol Meaning IV. Assembly Attaching or Removing BitOperation How to Use the Belt Hook Speed SelectionBit-locking Function To Change the Belt Hook Location Side Control PanelTo Set the Belt Hook Angle Position LED lightBattery Pack Life Battery Pack For Appropriate Use of Bat­ tery packLi­ion Battery pack EY9L40 Battery RecyclingLi-ion Battery Pack Battery Charger ChargingCommon Cautions for the Li- ion/Ni-MH/Ni-Cd Battery Pack Ni-MH/Ni-Cd Battery PackLamp Indications IX. Specifications VI. MaintenanceVII. Accessories VIII. AppendixLi-ion battery pack Ni-Cd/Ni-MH battery packSécurité électrique Conservez CES INSTRUC­ TionsSécurité de la zone de travail Sécurité personnelleUtilisation et soins de l’outil méca­ nique Utilisation et soins de la batterie de l’outilMaintenez les outils de coupe affûtés et propres Réparation Symbole SignificationParticulieres AvertissementIII.CHARGEUR DE BAT­ Instructions de sécurité impor­ tantesRemarque IV. MontageFixation ou retrait d’une mèche EnlèvementUtilisation du commutateur pour une rotation en sens normal Fixation ou retrait de la bat­ terie autonomeCorps principal Fonctionnement du com­ mutateur Mise EN GardeFonction de verrouillage de la mèche Réglage du couple de ser­ rage de l’embrayageSélection de la vitesse Essayez le réglage avant l’utilisa- tion effectiveComment utiliser le cro­ chet de ceinture Pour régler l’angle de posi­ tion du crochet de ceintureLumière DEL Panneau de commandeTémoin d’avertissement de sur­ chauffe Appuyez sur pour al­ lumer et éteindre la lumière DELChargeur de batterie Recharge Tenue recommandéeBatterie Longévité des batteries autonomesBatterie autonome Li-ion Batterie autonome Ni-MH/Ni-CdIndication DU Voyant VIII. Appendice VII. AccessoiresVI. Entretien IX. Caracteristiques TechniquesChargeur DE Batterie Batterie autonome Li-ionBatterie autonome Ni-MH/Ni-Cd Seguridad del lugar de trabajo DAD GeneralesGuarde Estas INSTRUC­ Ciones Seguridad eléctricaUso y cuidados de herramientas eléctricas Uso y cuidado de la herramienta a bateríaMantenga las herramientas de corte afiladas y limpias ¡ADVERTENCIA DAD EspecíficasServicio Con los ojos, solicite además ayuda médicaGuarde Estas Instrucciones III. Para EL CARGA­ DOR DE Bateria Y LA BateriaInstrucciones de seguridad im­ portantes Tal como se especifica a continua­ ciónIV. Montaje Colocación o extracción de la brocaNota Cuerpo principal Funcionamiento del inter­ ruptor FuncionamientoColocación y extracción de la batería PrecauciónAjuste de torsión del em­ brague Selección de velocidadFunción de bloqueo de broca Cómo utilizar el gancho del cinturón Para cambiar el lugar de ubicación del gancho de cinturónLuz LED Panel de controleEmpuñadura recomendada Luz de advertencia de sobrecalenta­ mientoBloque de pilas Para un uso adecuado de la batería Cargador de la batería CargaBatería Ni-MH/Ni-Cd VI. Mantenimiento VII. AccesoriosUtilice sólo brocas adecuadas al tamaño del portabrocas VIII. Anexo IX. EspecificacionesBatería Ni-MH/Ni-Cd Memo Panasonic Consumer Electronics Company

EY7440 specifications

The Panasonic EY7440 is a revolutionary cordless drill/driver that stands out in the competitive power tool market. Designed for both professionals and DIY enthusiasts, its remarkable features, technologies, and characteristics make it a versatile choice for various applications.

One of the most notable features of the EY7440 is its powerful motor, which delivers an impressive torque output. This enables users to tackle demanding tasks with ease, from drilling through tough materials to driving screws into dense woods. The tool offers multiple speed settings, giving users the flexibility to select the right speed for their specific needs, ensuring optimal performance and efficiency.

The battery system in the EY7440 is another highlight. It utilizes a high-capacity 36V lithium-ion battery that provides extended run times and quick charging capabilities. This means less downtime between tasks, allowing users to maintain productivity throughout the day. Additionally, the battery management system enhances battery life by preventing over-discharge, ensuring longevity.

Panasonic has incorporated cutting-edge technologies into the EY7440, such as the electronic clutch system, which prevents stripping of fasteners and ensures a seamless driving experience. This system allows users to work with a variety of materials without worrying about damaging the workpiece or the tool itself.

The ergonomic design of the EY7440 contributes to user comfort during extended periods of use. Its lightweight construction and balanced weight distribution minimize fatigue, making it ideal for overhead or prolonged tasks. The rubberized grip provides a secure hold, enhancing control and precision during operation.

Another standout characteristic is the integrated LED work light, which illuminates dark work areas, enhancing visibility and safety. This feature is particularly beneficial when working in confined or dimly-lit spaces, ensuring that users can accurately position their tools and fasteners.

Durability is key with the Panasonic EY7440, as it is built to withstand the rigors of construction environments. Its rugged casing and sealed design make it resistant to dust and moisture, ensuring reliable performance even in challenging conditions.

In summary, the Panasonic EY7440 is a high-performance cordless drill/driver packed with advanced features and technologies. With its powerful motor, efficient battery system, ergonomic design, and durability, it is an excellent choice for users seeking a reliable and versatile tool for a wide range of applications. Whether for professional use or home projects, the EY7440 promises to deliver exceptional results.