Miter Cutting
The miter fence allows miter cuts from 0° to 90°. The table mounted miter scale has a resolution of 1°.
To perform a miter cut:
1.Slide the crosscut table to the front edge of the sliding table and lock it in place.
2.Install the fence as shown in Figures 62 & 63 for angled cuts.
Figure 62. Fence set-up for angled cuts.
3.Set the fence to the desired angle using the crosscut table angle gauge and lock the angle with the crosscutting fence knob (see Figure 64).
Angle Gauge
Figure 64. Crosscut table angle gauge.
4.Position the flip stop according to the length of the workpiece you want to cut off to the left of the blade.
5.Load the workpiece onto the table saw. The setup should look similar to Figure 65.
Crosscut Fence
Knobs
Figure 63. Fence installed (underside view).
Figure 65. Example of miter cutting operation.
6.Once all the necessary safety precautions have been taken, perform the cutting opera- tion.
G0460/G0461 12" Sliding Table Saw |