Grizzly G0460/G0461 owner manual

K	L
M

N O P

Figure 2. Fence controls.

K.Rip Fence Lock Handle: Secures the fence face on its forward/backward slide track.

L.Micro-Adjust Knob: Precisely adjusts the fence.

M.Rip Fence Scale: Allows precise measure- ment of rip cutting operations.

N.Fence Face: The surface that the workpiece slides along.

O.Fence Body: Guides the fence along the rail and supports the fence face.

P.Rip Fence Body Lock Lever: Secures the fence body in position along the fence rail.

-6-

Q	R		T
		V	U

S

W

Figure 3. Blades.

Q.Riving Knife: Maintains kerf opening during cutting operations. This function is crucial to preventing kickback caused by the kerf clos- ing behind the blade.

R.Main Blade (Not Included): Performs the cut- ting operations.

S.Scoring Blade (Not Included): Small cutting blade that rotates opposite the main saw blade. The blade scores the workpiece before the actual cutting operation is performed, thus preventing tear-out in laminate materials. The scoring blade is adjustable left and right, up and down, and in kerf thickness.

T.Scoring Blade Vertical Adjustment Socket: Internal cap screw adjusts the height of the scoring blade.

U.Scoring Blade Horizontal Adjustment Socket: Internal cap screw adjusts the hori- zontal position of the scoring blade in relation to the main blade.

V.Scoring Blade Lock Socket: Locks the scoring blade adjustments.

W.Lower Blade Guard: Reduces the risk of accidental operator contact with the blade when the table is at its full extension.

G0460/G0461 12" Sliding Table Saw