Woodstock Model owner manual Introduction About Your NEW Sander, Woodstock Service and Support

Page 5

INTRODUCTION

ABOUT YOUR NEW SANDER

This new Shop Fox® W1676 Sander has been specially designed to provide many years of trouble-free ser- vice. Close attention to detail, ruggedly built parts and a rigid quality control program assure safe and reliable operation.

The Model W1676 is capable of a wide variety of sanding operations. The 6" wide belt can quickly sand large surfaces flat and the 10" sanding disc and adjustable table can sand many different angles. The combination sander comes with a cabinet-style stand, miter gauge, 1 H.P. motor, sanding belt and disc, and electrical package.

Woodstock International, Inc. is committed to customer satisfaction in providing this manual. It is our intent to make sure all the information necessary for safety, ease of assembly, practical use and dura- bility of this product be included.

If you should have any comments regarding this manual, please feel free to contact us at:

Woodstock International, Inc.

Attn: Technical Department

P.O. Box 2309

Bellingham, WA 98227

WOODSTOCK SERVICE AND SUPPORT

We stand behind our machines! In the event that a defect is found, parts are missing or questions arise about your machine, please contact Woodstock International Service and Support at 1-360-734-3482 or send e-mail to: tech-support@woodstockint.com. Our knowledgeable staff will help you troubleshoot problems, send out parts or arrange warranty returns.

-2-

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Model W1676 Box ContentsCombination Sander Page Table Of Contents Introduction About Your NEW Sander Woodstock Service and SupportMachine Specifications Warranty and ReturnsDisconnect machine when cleaning, adjusting or servicing Safety FirstKeep proper footing and balance at all times Keep fingertips away from the moving belt or disc Additional Safety Instructions For Sanders110V Operation Electrical RequirementsExtension Cords Grounding220V Operation Never place fingers close to moving disk Avoiding Potential InjuriesUnpacking Assembly InstructionsQTY Clean Up General Sanding Disc Sanding Unit To BaseIdler Roller Dust Ports Back StopQuick Release To install the working table next to the discWorking Table Adjustments Belt Tracking/Tension To adjust the tracking Unplug the combination sanderIdler Guard To adjust the tensionVertical positioning bolts Vertical PositioningTo replace abrasive sanding disc Changing Abrasive DiscTable Tilt To adjust the working table angleOperations TestingCurved Sanding Horizontal SandingSanding end grain Disc SandingLubrication MaintenanceTable And Base Closure 220VOLT W1676 Combination Sander120 107 90A 110 104 122 Description Page Page Warranty Card BOX BELLINGHAM, WA
Top Page Image Contents