Black & Decker BDBN1200, 625779-00 Features, Important Charging Notes, Maintenance Stage

Page 7

625779-00 BDBN1200Booklet 8/9/04 9:55 AM Page 7

Important Charging Notes

1.After normal usage, your battery pack should be fully charged in 3 to 6 hours. If the battery pack is run-down completely, it may take up to 6 hours to become fully charged. Your battery pack was sent from the factory in an uncharged condition. Before

attempting to use it, it must be charged for at least 9 hours.

2.DO NOT charge the battery pack in an air temperature below 40°F (4,5 °C) or above 105°F.(40,5 °C) This is important and will prevent serious damage to the battery pack. Longest life and best performance can be obtained if battery pack is charged when air temperature is about 75°F.(24°C).

3.While charging, the charger may hum and become warm to touch. This is a normal condition and does not indicate a problem.

4.If the battery pack does not charge properly—(1) Check current at receptacle by plugging in a lamp or other appliance. (2) Check to see if receptacle is connected to a light switch which turns power off when you turn out the lights. (3) Move charger and battery pack to a surrounding air temperature of 40°F (4,5 °C) to 105°F.(40,5 °C) (4) If the receptacle and temperature are OK, and you do not get proper charging, take or send the battery pack and charger to your local

Black & Decker service center. See Tools Electric in yellow pages.

5.The battery pack should be recharged when it fails to produce sufficient power on jobs which were easily done previously. DO NOT CONTINUE using product with its battery pack in a depleted condition.

6.To prolong battery pack life, avoid leaving the battery pack on charge for extended periods of time (over 30 days without use). Although overcharging is not a safety concern, it can significantly reduce overall battery pack life.

7.The battery pack will reach optimum performance after being cycled 5 times during normal usage. There is no need to run the batteries down completely before recharging. Normal usage is the best method of discharging and recharging the batteries.

Maintenance Stage

The trickle charge feature of the charger allows the battery pack to remain in the charger and ready for use. With the charger connected to standard household current, the red charging indicator light will glow constantly. The charger will keep the power pack fully charged. A battery pack will slowly lose its charge when kept out of the charger.

SAVE THESE INSTRUCTIONS FOR FUTURE USE

Features

A.jam clearing latch

B.contact trip

C.no-mar pad

D.low nail indicator windows

E.magazine

F.pusher release (other side)

G.lock-off

H.trigger

I.depth lock button

J.depth adjustment bar

G

 

A

 

 

B

I

J

C

D

 

 

H

 

 

 

 

E

 

 

F

NAIL SPECIFICATIONS - BDBN1200 18G CORDLESS NAILER

Lengths

5/8'' - 2" (16 mm - 50 mm)

Diameters

18 gauge / calibre 18

7

Image 7
Contents Call Tool Use and Care Electrical SafetyPersonal Safety Work AreaService Important Safety Instructions for NailersBDBN1200Booklet 8/9/04 954 AM Battery Cap Information Safety Warnings and Instructions ChargingCharging the Battery Pack Maintenance Stage FeaturesImportant Charging Notes Loading the Tool Figure Using the Lock-Off FigureAdjusting Depth Figure Operating InstructionsClearing a Jammed Nail Figure MaintenanceAccessories Rbrc SealFull Two-Year Home Use Warranty Service InformationMesures de sécurité Électricité Aire de travailSécurité personnelle Utilisation et entretien de l’outil Directives de sécurité importantes relatives aux cloueursEntretien BDBN1200Booklet 8/9/04 955 AM Toujours Information concernant le capuchon du bloc-pile Directives et consignes de sécurité ChargementCalibre AWG Chargement du bloc-pilesÉtape d’entretien Conseils importants concernant le chargementCaractéristiques Utilisation de l’outil Mode demploiUtilisation du Verrouillage Fig Chargement de l’outil FigDésenrayage de clou Fig Réglage de profondeur FigEntretien / Nettoyage Garantie complète de deux ans pour usage résidentiel AccessoiresInformation sur les services Sceau RbrcmcSeguridad eléctrica Guarde Este Manual Para Futuras Consultas Área de trabajoSeguridad personal Uso y cuidados de la herramienta Instrucciones de seguridad importantes para clavadorasServicio BDBN1200Booklet 8/9/04 955 AM Información acerca del protector de la batería Calibre AWG Advertencias e instrucciones de seguridad CargaNotas importantes respecto al proceso de carga Cómo cargar la unidad de alimentaciónCaracterísticas Etapa de mantenimientoActivación de la herramienta Instrucciones de funcionamientoUso del bloqueo en off Figura Carga de la herramienta FiguraMantenimiento / Limpieza Cómo despejar un clavo atorado FiguraEl sello Rbrc Información de servicio AccesoriosGarantía completa de dos años para uso doméstico Para Otras Localidades Llame AL 55 5326 BDBN1200Booklet 8/9/04 955 AM BDBN1200Booklet 8/9/04 955 AM