Black & Decker BDBN1200 Maintenance, Rbrc Seal, Accessories, Clearing a Jammed Nail Figure

Page 9

625779-00 BDBN1200Booklet 8/9/04 9:55 AM Page 9

There are two drive positions:

1.To drive the nail shallower, press the depth lock button and slide the depth adjustment bar to the forward position. Release the depth lock button.

2.To sink a nail deeper, press the depth lock button and slide the depth adjustment bar

to the full rear position. Release the depth lock button.

Clearing a Jammed Nail (Figure 4)

If a nail becomes jammed in the nosepiece, keep the tool pointed away from you and follow these instructions to clear:

1.Engage lock off.

2.Disconnect battery.

3.Release pusher from behind nails.

4.Pull up on latch then pull up to open front door.

5.Remove bent nail, using pliers if necessary.

6.If driver blade is in the down position, insert screwdriver or other rod into nosepiece and push driver blade back in position.

7.Remove rod and close front door.

8.Lift latch to engage wire and pull back to lock in place.

9.Reinsert nails into magazine (see Loading the Tool).

10.Push magazine closed until it locks in place.

4

Maintenance

Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.

IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (other than those listed in this manual) should be performed by authorized service centers or other qualified service organizations, always using identical replacement parts.

The RBRC™ Seal

The RBRC™ (Rechargeable Battery Recycling Corporation) Seal on the nickel-cadmium battery (or battery pack) indicates that the

costs to recycle the battery (or battery pack) at the end of its useful life

have already been paid by Black & Decker. In some areas, it is illegal to place spent nickel-cadmium batteries in the trash or municipal solid waste stream and the RBRC program provides an environmentally conscious alternative.

RBRC in cooperation with Black & Decker and other battery users, has established programs in the United States and Canada to facilitate the collection of spent nickel- cadmium batteries. Help protect our environment and conserve natural resources by returning the spent nickel-cadmium battery to an authorized Black & Decker service center or to your local retailer for recycling. You may also contact your local recycling center for information on where to drop off the spent battery, or call 1-800-8-BATTERY.

Accessories

Recommended accessories for use with your tool are available from your local dealer or authorized service center. If you need assistance regarding accessories, please call:

1-800-544-6986.

WARNING: The use of any accessory not recommended for use with this tool could be hazardous.

9

Image 9
Contents Call Personal Safety Electrical SafetyWork Area Tool Use and CareService Important Safety Instructions for NailersBDBN1200Booklet 8/9/04 954 AM Battery Cap Information Safety Warnings and Instructions ChargingCharging the Battery Pack Features Maintenance StageImportant Charging Notes Adjusting Depth Figure Using the Lock-Off FigureOperating Instructions Loading the Tool FigureAccessories MaintenanceRbrc Seal Clearing a Jammed Nail FigureFull Two-Year Home Use Warranty Service InformationAire de travail Mesures de sécurité ÉlectricitéSécurité personnelle Directives de sécurité importantes relatives aux cloueurs Utilisation et entretien de l’outilEntretien BDBN1200Booklet 8/9/04 955 AM Toujours Information concernant le capuchon du bloc-pile Directives et consignes de sécurité ChargementCalibre AWG Chargement du bloc-pilesConseils importants concernant le chargement Étape d’entretienCaractéristiques Utilisation du Verrouillage Fig Mode demploiChargement de l’outil Fig Utilisation de l’outilRéglage de profondeur Fig Désenrayage de clou FigEntretien / Nettoyage Information sur les services AccessoiresSceau Rbrcmc Garantie complète de deux ans pour usage résidentielGuarde Este Manual Para Futuras Consultas Área de trabajo Seguridad eléctricaSeguridad personal Instrucciones de seguridad importantes para clavadoras Uso y cuidados de la herramientaServicio BDBN1200Booklet 8/9/04 955 AM Información acerca del protector de la batería Calibre AWG Advertencias e instrucciones de seguridad CargaNotas importantes respecto al proceso de carga Cómo cargar la unidad de alimentaciónCaracterísticas Etapa de mantenimientoUso del bloqueo en off Figura Instrucciones de funcionamientoCarga de la herramienta Figura Activación de la herramientaCómo despejar un clavo atorado Figura Mantenimiento / LimpiezaEl sello Rbrc Accesorios Información de servicioGarantía completa de dos años para uso doméstico Para Otras Localidades Llame AL 55 5326 BDBN1200Booklet 8/9/04 955 AM BDBN1200Booklet 8/9/04 955 AM