Emerson MINI-MATE2 user manual System Controls, Other Standard Control Features

Page 14

Standard Features—5 Ton Systems

2.4System Controls

System controls include a microprocessor control board mounted in the evaporator/chilled water unit and a wall-mounted interface with a two-line, 16-character liquid crystal display. A seven-key, membrane keypad for setpoint/program control, unit On/Off and alarm silence is below the LCD screen. It provides temperature setpoint and sensitivity adjustment, humidity setpoint and sensitivity adjustment, digital display of temperature, humidity, setpoints, sensitivities and alarm conditions.

The wall-boxis field-wired to the microprocessor control using standard four-conductor thermostat wire (field-supplied). The temperature and humidity sensors are in the wall box, which can be installed up to 300 feet (91.4m) from the evaporator unit. The unit-mounted control board also includes common alarm terminals and shutdown terminals. The unit automatically restarts after a power outage.

Figure 6 Wall-box

2.4.1Other Standard Control Features

• Adjustable auto restart

• Calibrate sensors

• 5 day/2 day setback

• Predictive humidity control

• Password protection

• Common alarm output

• Alarm enable/disable

• Remote shutdown terminals

• Self-diagnostics

 

Liebert® Mini-Mate2™

8

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Liebert Mini-Mate2 Page Table of Contents Microprocessor Control System Performance Microprocessor ControlsAlarms System OPERATION, Testing and MaintenanceTables Important Safety Instructions Liebert Mini-Mate2 Product Model Information Air-cooled systems-indoor centrifugal condensing unitsPFH 0 67 a a L System configurations-60 Hz System configurations-50 HzIntroduction Condensing Unit Section-Split System Standard FEATURES-5 TON SystemsEvaporator Section-Split System Chilled Water UnitsOther Standard Control Features System ControlsHumidifier Switches and MotorsReheat SensorsFree-Cooling Optional Configurations-Prop Fan Condensing UnitsOptional Configurations-Water/Glycol Condensing Units Optional Configurations-Chilled Water Units SHIP-LOOSE ACCESSORIES-FIELD-INSTALLED Ship-Loose Accessories-Field-Installed Room Preparation Installation ConsiderationsSite Preparation and Installation Location Considerations Air-cooled systemsCooling Drycooler Ceiling Unit WeightsUnit weights Cooling UnitsEquipment Inspection Upon Receipt Installing the Ceiling UnitsClose Coupled Installations Evaporator Air Distribution Filter BoxHumidifier Water Supply Line Connections for Ducted SystemsPiping Connections and Coolant Requirements Drain Line Evaporator external static pressureEquivalent Pipe Liquid Suction Length, ft m Recommended refrigerant line sizesEquivalent lengths for various pipe fittings, ft m Copper PipeVertical fall below evaporator Pipe length and condenser elevation relative to evaporatorVertical rise above evaporator/maximum Refrigerant charge Total refrigerant = Units and LinesQuick Connect Fittings Line charges refrigerant per 100 ft m of Type L copper tubeDPN000218 Threaded rod and hardware kit installation Electrical ConnectionsPower Connections Control ConnectionsEvaporator unit electrical connections Close coupled installation General Considerations Piping ConnectionsDucting Considerations for Specific ApplicationsAIR-COOLED Dimensional Data AIR Cooled AIR-COOLED Model # 60Hz 50Hz Outdoor Air-Cooled Condensing Unit InstallationWeight, lb kg Rev Regulating Valve Water/Glycol Piping ConsiderationsCondensing Unit Fluid Requirements WATER/GLYCOL Dimensional Data WATER/GLYCOL DPN000214 Hot Water Reheat Coil Optional free-cooling coil 3-way valve on water/glycol unitsChecklist for Completed Installation Feature Overview Microprocessor ControlMain Menu Menu SetpointsTime Active AlarmsStatus DateShow DIP Switch Setup OperationRestart Time Delay 2 C/F DegreesFunction Default Range Change PasswordsSetup functions, default values and allowable ranges Calibrate SensorsCommon Alarm Enable Alarm EnableAlarm Time Delay Alarm default time delaysCustom Text Custom AlarmsStandard Custom Alarm Messages LCD Display ContrastEquipment switch settings unit control board Run Diagnostics Available On Rev 1.001.0 and higherEquipment Options Switches Switch settings wall box boardTest Outputs Test Control BoardControl menu Control board-inside evaporator Wall box boardSystem Performance Microprocessor Controls Temperature ControlHumidity Control Communications Load Control FeaturesHumidification Operation Custom Alarms Alarms Definitions and TroubleshootingAlarms High Head PressureHigh Water Alarm TemperatureHumidifier Problem Alarm Air-Cooled SystemsOptional/Custom Alarms System OPERATION, Testing and Maintenance System TestingMaintenance and Component Operation Blower Removal Blower SystemAir Distribution Refrigeration SystemThermostatic Expansion Valve Glycol Solution MaintenanceDischarge Pressure Air-Cooled Condensing UnitsHot Gas Bypass Hot gas bypassMechanical Failure Replacement ProceduresCompressor Replacement Electrical FailureReplace a Failed Compressor Steam Generating Humidifier-Operation Procedures Replacing the Humidifier Canister Humidifier Circuit Board AdjustmentsHumidifier control board DIP switch settings AmpsMaintenance Inspection Checklist Troubleshooting TroubleshootingShort Symptom Possible Cause Check Or Remedy Cooling cycle tooDisplay Problem Display freezesTwor k Ne tPpor t Is t Care

MINI-MATE2 specifications

The Emerson MINI-MATE2 is a cutting-edge temperature and pressure monitoring device specifically designed for the needs of the refrigeration and HVAC industries. Known for its reliability and user-friendly interface, this compact unit serves as a key tool for technicians and facility managers looking to optimize system performance while ensuring compliance with safety standards.

One of the main features of the MINI-MATE2 is its advanced digital display, which allows users to easily monitor and interpret temperature and pressure readings in real-time. Its highly responsive sensors ensure accurate data collection, vital for maintaining optimal operating conditions. Moreover, the device supports a wide range of refrigerants, making it versatile for different applications, from walk-in coolers to commercial refrigeration systems.

The MINI-MATE2 utilizes state-of-the-art technology to enhance efficiency and performance. Equipped with Bluetooth connectivity, it allows for wireless communication with mobile devices, enabling technicians to track readings and receive alerts remotely. This feature not only improves convenience but also helps in quick decision-making, ensuring timely interventions when anomalies are detected.

Another significant characteristic is its robust construction. Built to withstand harsh environments, the MINI-MATE2 features a durable casing that protects it from physical impacts and environmental factors. This resilience ensures longevity, making it a cost-effective investment for any facility.

In addition, the MINI-MATE2 is designed with user-friendliness in mind. Its intuitive interface means that even technicians with limited experience can easily navigate its functionalities. Quick setup and straightforward operation allow for rapid adoption and extensive use in a variety of settings.

Finally, the MINI-MATE2 also includes built-in data logging capabilities. Users can record historical data for analysis and reporting purposes, which is essential for performing trend analysis and identifying potential issues before they escalate. By providing a comprehensive overview of system performance, the MINI-MATE2 empowers users to make informed decisions that can lead to improved energy efficiency and reduced operational costs.

Overall, the Emerson MINI-MATE2 is an indispensable tool for modern refrigeration and HVAC applications, combining cutting-edge technology, user-friendly design, and essential features to support efficient system management.
Top Page Image Contents