Hobart Welding Products CHAMP 2060 manual Specifications, Symbol Definitions

SECTION 2 – DEFINITIONS

2-1. Symbol Definitions

	Engine Choke		Read Operator’s	A	Amperes	V	Volts
			Manual
	Engine Oil		Fuel		Battery (Engine)		Engine
	Positive		Negative		Alternating Current		Output
					(AC)
h	Hours	s	Seconds		Time		Protective Earth
							(Ground)

Circuit Breaker

Temperature

SECTION 3 – SPECIFICATIONS

NOTE

This unit uses either a Kohler or a Honda engine. Differences between models are noted throughout this manual.

3-1. Weld, Power, And Engine Specifications

Welding	Weld Output	Rated	Maximum	Generator Power
		Welding	Open Circuit		Fuel Capacity	Engine
Mode	Range			Rating
		Output	Voltage
						Kohler CS12STG
		180 A, 25 V,				Air-Cooled,
						One-Cylinder,
		30% Duty		Single-Phase,
						Four-Cycle,
		Cycle
	40 – 180 A		80	6 kVA/kW (Peak)	Kohler:	12 HP (360 CC),
		130 A, 25 V,		5.5 kVA/kW	1.8 gal (6.9 L) Tank	Gasoline Engine
	(60 Hz)		(60 Hz)
CC/DC		60% Duty		(Continuous)		OR
	40 – 160 A		70
		Cycle		50/25 A,	Honda:	Honda GX390
	(50 Hz)		(50 Hz)
		100 A, 25 V,		110/220 V AC, 50 Hz	1.7 gal (6.4 L) Tank	Air-Cooled,
				120/240 V AC, 60 Hz		One-Cylinder,
		100% Duty
						Four-Cycle,
		Cycle
						13 HP (390 CC),
						Gasoline Engine

OM-499 Page 9