Grizzly g0749, g0746 owner manual Tailstock Info

Main Specifications:
Operation Info
Swing Over Bed	20 in.
Distance Between Centers	60 in.
Max Weight Between Centers	1300 lbs.
Swing Over Cross Slide	13 in.
Swing Over Saddle	13 in.
Swing Over Gap	25 in.
Maximum Tool Bit Size	1 in.
Compound Travel	5 in.
Carriage Travel	60 in.
Cross Slide Travel	13 in.
Headstock Info
Spindle Bore	3.15 in.
Spindle Taper	MT#7
Number of Spindle Speeds	15
Spindle Speeds	24 – 1600 RPM
Spindle Type	D1-8 Camlock
Spindle Bearings	Tapered Roller
Spindle Length	28-1/8 in.
Spindle Length with 3-Jaw Chuck	33 in.
Spindle Length with 4-Jaw Chuck	32-7/8 in.
Spindle Length with Faceplate	29-7/8 in.
Tailstock Info
Tailstock Quill Travel	4-3/4 in.
Tailstock Taper	MT#5
Tailstock Barrel Diameter	2.6 in.
Threading Info
Number of Longitudinal Feeds	66
Range of Longitudinal Feeds	0.0027 – 0.1500 in./rev.
Number of Cross Feeds	66
Range of Cross Feeds	0.0013 – 0.0750 in./rev
Number of Inch Threads	66
Range of Inch Threads	1 – 56 TPI
Number of Metric Threads	66
Range of Metric Threads	0.5 – 28 mm
Number of Modular Pitches	33
Range of Modular Pitches	0.5 – 3.5 MP
Number of Diametral Pitches	33
Range of Diametral Pitches	8 – 56 DP
Dimensions
Bed Width	13 in.
Leadscrew Diameter	1-3/8 in.
Leadscrew TPI	4 TPI
Leadscrew Length	79-1/2 in.
Steady Rest Capacity	6-1/4 in.
Follow Rest Capacity	3-15/16 in.
Faceplate Size	17 in.
Feed Rod Diameter	13/16 in.
Floor to Center Height	45-1/4 in.
Height With Leveling Jacks	63 in.

Model G0746/G0749 (Mfg. Since 3/13) -9-