Grizzly g0746, g0749 owner manual Carriage, Tailstock

Carriage

HI

J K

R

L

N M

Q P O

Figure 4. Carriage controls.

H.4-Way Tool Post: Holds up to four different types of tooling, making it quick and easy to switch tool type for different types of turning operations.

I.compound Rest Handwheel: Moves tool toward and away from workpiece at preset angle.

J.carriage Lock: Secures carriage in place for greater rigidity when it should not move.

K.Feed Selection Lever: Selects power feed for carriage or cross slide.

L.Thread Dial: Indicates when to engage the half nut during inch threading operations.

M.Spindle Lever: Starts, stops, and reverses direction of spindle rotation.

N.Feed Lever: Enables carriage for power feed or threading operations.

O.One-Shot Oiler: Pumps oil from apron res- ervoir to lubricate carriage ways.

P.Half Nut Lever: Engages/disengages half nut for threading operations.

Q.carriage Handwheel: Moves carriage along the bed.

R.cross Slide Handwheel: Moves cross slide toward and away from workpiece.

-6-

Tailstock

Figure 5. Additional tailstock controls.

X

Y

Figure 6. Tailstock controls.

S.Quill: Holds centers and tooling.

T.Quill Lock Lever: Secures quill in position.

U.Tailstock Lock Lever: Secures tailstock in position along the bedway.

V.Graduated Scale: Indicates quill movement in increments of 0.001" with one full revolu- tion equaling 0.200" of quill travel.

W.Quill Handwheel: Moves quill toward or away from spindle.

X.Tailstock Offset Screws: Adjusts tailstock offset left or right from spindle centerline (1 of 2).

Y.Offset Scale: Indicates relative distance of tailstock offset from spindle centerline.

Model G0746/G0749 (Mfg. Since 3/13)