Grizzly g0749, g0746 owner manual Follow Rest, Carriage & Slide Locks

Follow Rest

The follow rest mounts to the saddle with two hex bolts (see Figure 61). It is used on long, slender parts to prevent workpiece deflection from the pressure of the cutting tool during operation. Adjust the follow rest fingers in the same manner as the those on the steady rest.

Note: To reduce the effects of friction, lubricate the finger tips with generous anti-sieze lubricant during operation.

Tools Needed	Qty
Open-End Wrench 24mm.	................................. 1

Fingers

Hex

Bolts

Figure 61. Follow rest attachment.

Model G0746/G0749 (Mfg. Since 3/13)

Carriage & Slide

Locks

The carriage, cross slide, and compound rest have locks that can be tightened to provide addi- tional rigidity during operation, especially during heavy cuts.

See Figures 62–63to identify the locations of the locks for each device.

Tools Needed	Qty
Open-End Wrench 13mm.	................................. 1

Carriage

Lock

Cross Slide

Lock

Figure 62. Location of carriage and cross slide

locks.

Compound Rest

Lock

Figure 63. Location of compound rest lock.

-47-