Cisco Systems NME-WAE manual Related Documentation, Service or services, Engine Syslog

Page 38

Related Documentation

NTP	Network Time Protocol. Protocol built on top of TCP that ensures accurate
	local timekeeping with reference to radio and atomic clocks located on the
	Internet. This protocol is capable of synchronizing distributed clocks within
	milliseconds over long time periods.
service (or services)	Alternate term for service module with installed application software.
engine
syslog	Industry-standard protocol for capturing log information for devices on a
	network.
TCP	Transmission Control Protocol. Connection-oriented transport-layer
	protocol that provides reliable full-duplex data transmission. TCP is part of
	the TCP/IP protocol stack.
TFTP	Trivial File Transfer Protocol. Simplified version of FTP that allows files to
	be transferred from one computer to another over a network, usually without
	the use of client authentication (for example, username and password).
UDP	User Datagram Protocol. Connectionless transport-layer protocol in the
	TCP/IP protocol stack that exchanges datagrams without acknowledgments
	or guaranteed delivery, requiring that error processing and retransmission be
	handled by other protocols.
WAE	Wide Area Application Engine (hardware plus software) that accelerates
	content delivery, while ensuring the maximum scalability and availability of
	the content.

Related Documentation

For additional information on the ACNS software, IOS software, and the network module hardware, see the following documentation:

Related Topic	Document Title

Cisco Application and Content Networking	Cisco Application and Content Networking System Software Configuration
System (ACNS) software	Guide for Centrally Managed Deployments
	Cisco Application and Content Networking System Software Configuration
	Guide for Locally Managed Deployments
	Cisco Application and Content Networking System Software Command
	Reference

IOS software	IOS Software

Network Modules	Cisco Network Modules Quick Start Guide
	Cisco Network Modules and Interface Cards Regulatory Compliance and
	Safety Information

Configuring Cisco Access Routers and the NME-WAE Network Module for ACNS Deployments

38	OL-13140-02

Image 38

Contents Contents Prerequisites for Installing the Cisco WAE Network Modules Restrictions for Cisco WAE Network ModulesFaceplate and LEDs Hard Disk and Memory SpecificationsCisco WAE Network Module Hardware Description Model Hard Disk MemoryShutdown CF cardHardware Interfaces Using ThisOn This Hardware Interface Configure These Settings This section contains the following topicsSetting Up Network Module Interfaces Summary Steps Detailed Steps ExamplesProcedure Command ExampleVerify interface configurations Save the router running configurationDisplay the router running configuration so that you can Opening and Closing a Network Module SessionPress Control-Shift-6 Example Configuration Press Ctrl-Shift-6Shutting Down and Starting Up Cisco WAE Network Modules Accessing the Acns Software on the Network ModuleConfiguration Mode Command Purpose Displaying Status and Diagnostic Output Command Purpose Displays general information about Service module. This information is useful toCisco technical support for problem DiagnosisCommand Reference Syntax Description Defaults Command Modes Command History Interface integrated-service-engineInterface integrated-service-engine slot/unit ReleaseModificationBootloader to perform startup routines Service-module integrated-service-engine default-bootDefaults Command Modes Command History None Privileged ExecCommand Description Service-module integrated-service-engine reloadService-module integrated-service-engine slot/unit reload Usage GuidelinesRelated Commands Description Service-module integrated-service-engine resetService-module integrated-service-engine slot/unit reset Router# service-module integrated-service-engine 1/0 resetCommand Description Username Service-module integrated-service-engine sessionOpen Related Commands Description Interface integrated-service-engine Service-module integrated-service-engine shutdownService-module integrated-service-engine slot/unit shutdown Integrated-service-engine resetCommand Description Service-module integrated-service-engine statistics Access routerRouter# service-module integrated-service-engine 1/0 status Service-module integrated-service-engine statusService-module integrated-service-engine slot/unit status Display the ISE network module software release versionRelated Commands Description Field Description Show controllers integrated-service-engineShow controllers integrated-service-engine slot/unit Related Commands Description Release Modification Show diagShow diag slot Show diag subslot Field Descriptions Network modules Displays basic interface configuration information forIntegrated-service-engine network modules Command Modes Command History Show interfaces integrated-service-engineShow interfaces integrated-service-engine slot/unit Field Description Errors created when the CRC generated by the originating LAN Station that is transmitting bad dataField Description Glossary BoothelperBootloader BladeEngine Syslog Service or servicesRelated Documentation Related Topic Document TitlePage OL-13140-02