NOTES:
1. Weights include economizer (Std)
2. Center of gravity.
3. Do not locate adjacent units with dis- charge facing economizer inlet. Mini- mum clearances to be:
Adjacent Units: 15
Top of Units: No overhang
Condenser Coil: 4
Economizer Side: 6
Filter Access Side: 10
4. For smaller service and operational clearances, contact Carrier Applica- tion Engineering department.
5. Bottom ducts designed to be attached to accessory roof curb. If unit is mounted on dunnage, it is recommended the ducts be supported by cross braces as done on accessory roof curb.
6. Dimensions are in inches. Dimen- sions in [ ] are in millimeters.
7. For units with electric heat, a ®eld- supplied 90° elbow must be installed in the supply ductwork below the unit discharge.
LEGEND
VFD Ð Variable Frequency Drive
UNIT SIZE | OPERATING | A | B | CORNER WEIGHT | ||||
WEIGHT |
|
| (lb) |
| ||||
50EJ/EK |
|
|
|
|
| |||
(lb) | 1 | 2 |
| 3 | 4 | |||
|
| |||||||
024 | 4016 | 823 | 914 | 1199 | 1080 | |||
028 | 4102 | 5- 81¤2 | 844 | 859 |
| 1210 | 1189 | |
030 | 4102 | 5- 81¤2 | 844 | 859 |
| 1210 | 1189 | |
034 | 4102 | 5- 81¤2 | 844 | 859 |
| 1210 | 1189 |
Fig. 3 Ð Base Unit Dimensions, 50EJ/EK024-034
4