Graco 395/490/495/595 Operation, Spray Tip Installation, Perform Pressure Relief Procedure

Page 21

Operation

Operation

Spray Tip Installation

1.Perform Pressure Relief Procedure, page 13.

2.Use spray tip (A) to insert OneSeal(B) into tip guard (C).

C

B

A

ti24653a

2. Insert Spray Tip.

ti24664a

3. Screw assembly onto gun. Tighten.

ti24652a

Spray

1.Spray test pattern. Adjust pressure to eliminate heavy edges.

ti24669a

334530A

21

Image 21
Contents Contractor/FTx Related ManualsSG3 334599Contents Hi-Boy ModelsStand Lo-Boy ModelExtension Cords GroundingFire and Explosion Hazard Equipment Misuse Hazard Personal Protective Equipment Stand Models Component IdentificationLo-Boy Models Hi-Boy Models Hi-Boy Models Grounding Power RequirementsExtension Cords PailsPressure Relief Procedure Trigger Lock 334530A SetupTi24638a Make certain ON/OFF switch is OFF Setup Startup Perform Pressure Relief Procedure20 s Perform Pressure Relief Procedure, Spray Tip InstallationOperation SprayClear Tip Clog Pressure Display Perform Pressure Relief Procedure, Digital DisplayStored Data Display Ti2824a Fast Flush Drain Tube CleanupTo flush drain tube and pump turn prime valve down Fast Flush Hose and GunIf flushing with water, flush again with Activity Interval MaintenanceTroubleshooting Mechanical/Fluid FlowRefer to this column Properly installed to allow full Possible during priming Error Code Messages Perform Pressure Relief Procedure,Electrical System see Pressure Relief Problem What to Check How to checkDisplays Code 03 message Step Ohms Motor thermal device When cool, correct cause Sprayer Will Not Run Sprayer Will Not RunOhms Sprayer Will Not Shut Off Troubleshooting ProcedureSee 395/490/495 Stand Sprayers132 395/490/495 Stand Sprayers Parts List Ref. Part DescriptionQty 395/490/495/595 Lo-Boy Sprayers 117 132 395/490/495/595 Lo-Boy Sprayers Parts List 395/490/495/595 Hi-Boy Sprayers 117 Ref. Part 395/490/495/595 Hi-Boy Sprayers Parts ListAlert  Accessories and LabelsControl Box Grommet Control Box Parts ListControl Box 120V, US/Japan Wiring Diagrams110V, UK 395/490/495/595 Technical SpecificationsNoise** dBa @ 70 psi 0.48 MPa, 4.8 bar For Graco Canada Customers Graco Standard WarrantyInternational Offices Belgium, China, Japan, Korea Graco Information