Campbell Hausfeld EZ5000 Series, IN423200AV specifications Priming, More on Walls, Doors

EZ5000 Series

Set-Up (Cont.)

To extend your reach for floors and ceilings, consider using the 24” Spray Wand accessory, which attach- es between the gun and tip. For floors, it angles the tip away from your feet, while allowing a comfort- able spraying position for your arm and back. For ceilings, it keeps the spray from being directly overhead and gives you an extra 2’ that may eliminate the need for a ladder.

More on Walls

If you aren’t comfortable spraying interior walls, consider using the Roller accessory. To use this accessory, remove the spray tip from the gun and attach the roller (see Figure 10).

After priming as usual, turn the One Touch Control to

the roller position (see Figure 12) and roll away.

Doors	Figure 12 - Icon
	showing Roller

Your airless	position
sprayer gives a

beautiful, brush-free finish on all kinds of doors: entry doors, cabinet doors, louvered doors, etc. Take the doors outside or to a well-ventilated area in a basement or garage. Protect the surrounding area with a drop cloth. For efficiency, arrange the doors so you can paint the sides as well as the front or back surface. To achieve a good spray pattern, use the lowest pressure setting on your sprayer.

Step 1 – Priming

Place both the suction and bypass tubes in the coating container (see Figure 13). Use the 1-gallon set of

Figure 10 – Attaching roller

Figure 13 – Suction and bypass tubes

tubes for 1-gallon paint containers, and the 5-gallon set for 5-gallon paint containers. Turn the One Touch

Figure 11 – Using roller attachment

www.chpower.com

7