Black & Decker FS8000HD Troubleshooting, Problem Possible Cause Possible Solution, Maintenance

Page 10

635040-03 FS drills 4/25/06 1:56 PM Page 10

 

TROUBLESHOOTING

 

Problem

Possible Cause

Possible Solution

• Unit will not start.

• Cord not plugged in.

• Plug tool into a working

 

 

outlet.

 

• Forward/reverse slider not fully

• Push slider completely to

 

depressed in desired direction.

the left or right.

 

• Circuit fuse is blown.

• Replace circuit fuse.

 

 

(If the product repeatedly

 

 

causes the circuit fuse to

 

 

blow, discontinue use

 

 

immediately and have it

 

 

serviced at a Black &

 

 

Decker service center or

 

 

authorized servicer.)

 

• Circuit breaker is tripped.

• Reset circuit breaker.

 

 

(If the product repeatedly

 

 

causes the circuit breaker

 

 

to trip, discontinue use

 

 

immediately and have it

 

 

serviced at a Black &

 

 

Decker service center or

 

 

authorized servicer.)

 

• Cord or switch is damaged.

• Have cord or switch

 

 

replaced at Black &

 

 

Decker Service Center or

 

 

Authorized Servicer.

For assistance with your product, visit our website www.blackanddecker.com for the location of the service center nearest you or call the BLACK & DECKER help line at

1-800-544-6986.

MAINTENANCE

Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.

IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment should be performed by authorized service centers or other qualified service personnel, always using identical replacement parts.

ACCESSORIES

Recommended accessories for use with your tool are available from your local dealer or authorized service center. If you need assistance regarding accessories, please call:

1-800-544-6986.

WARNING: The use of any accessory not recommended for use with this tool could be hazardous.

SERVICE INFORMATION

All Black & Decker Service Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service. Whether you need technical advice, repair, or genuine factory replacement parts, contact the Black & Decker location nearest you. To find your local service location, refer to the yellow page directory under "Tools—Electric" or call: 1-800-544-6986 or visit www.blackanddecker.com

FULL TWO-YEAR HOME USE WARRANTY

Black & Decker (U.S.) Inc. warrants this product for two years against any defects in material or workmanship. The defective product will be replaced or repaired at no charge in either of two ways.

The first, which will result in exchanges only, is to return the product to the retailer from whom it was purchased (provided that the store is a participating retailer). Returns should be made within the time period of the retailer’s policy for exchanges (usually 30 to 90 days after the sale). Proof of purchase may be required. Please check with the retailer for their

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Drills and Hammer Drills VEA EL Español EN LA ContraportadaGeneral Safety Rules Specific Safety Rules Functional Description 25/06 156 PM Safety Warnings and Instructions Drills MotorRemoving and attaching the chuck fig. D, E, F, G AssemblyInserting a drill bit or other accessory fig. B & C Fast Drive Bit Change System FS6000FDSelecting the direction of rotation FS6000FD, FS6500HD Selecting the drilling mode FS6500HD, FS8000HD fig. HOperating Instructions Selecting the direction of rotation FS7000D, FS8000HDTwo-gear selector FS8000HD fig Setting the drilling depth FS6500HD, FS8000HDSwitching on and off DrillingMaintenance TroubleshootingProblem Possible Cause Possible Solution Service Information Full TWO-YEAR Home USE WarrantySpecial Warranty Note to Contractors Covered Under OUR WarrantyGuide D’UTILISATION Numéro de catalogue FS7000D illustréRègles de sécurité générales Conserver CES DirectivesRègles DE Sécurité Spécifiques Toujours Porter UN Équipement DE Protection HomologuéRallonges Description Fonctionnelle FS drills 4/25/06 156 PM Assemblage Avertissements de sécurité et directives perceusesMoteur Modèle FS6500HD, FS8000HD Insérer une mèche ou un autre accessoire fig. B et CRetrait et fixation du mandrin fig. D, E, F, G Mandrin et clé modèle FS7000D fig. CSélection du sens de rotation modèles FS7000D, FS8000HD FonctionnementSélection du sens de rotation modèles FS6000FD, FS6500HD Mandrin sans clé modèles FS6500HD, FS8000HD fig. FMise en marche et arrêt Sélecteur à double marche modèle FS8000HD figPerçage 25/06 156 PM Information SUR LES Réparations AccessoiresEntretien Présente GarantieCapacités Maximales Recommandées Manual DE Instrucciones Número de catálogo exhibido FS7000DNormas generales de seguridad Conserve Estas InstruccionesNormas DE Seguridad Específicas Cables prolongadores Capacidad nominal en amperiosDescripción DE FS drills 4/25/06 157 PM Ensamblaje Instrucciones y advertencias de seguridad TaladrosFS6500HD, FS8000HD Portabrocas y llave FS7000D fig. C Inserción de una broca u otro accesorio figuras B y CAcoplamiento y extracción del portabrocas fig. D, E, F, G Sistema de cambio de brocas Fast Drive FS6000FDPortabrocas sin llave FS6500HD, FS8000HD fig. F Instrucciones de operaciónSelección de la dirección de rotación FS6000FD, FS6500HD Portabrocas con llave FS7000D fig. GSelector de dos engranajes FS8000HD fig Selección de la dirección de rotación FS7000D, FS8000HDSelección del modo de taladrado FS6500HD, FS8000HD fig. H Ajuste de la profundidad de perforación FS6500HD, FS8000HDTaladrado en madera Taladrado en metalProblema Causa posible Solución posible MantenimientoCapacidades Máximas Recomendadas Nota Especial DE Garantía Para ContratistasMERIDA, YUC CULIACAN, SINMEXICO, D.F MONTERREY, N.LFS drills 4/25/06 157 PM FS drills 4/25/06 157 PM
Top Page Image Contents