Delta 50-786 instruction manual Operation, Attaching the Hose to, Intake Port

Page 13

ATTACHING THE HOSE TO THE

INTAKE PORT (Fig. 31, 32)

Model 50-786 provides two 4" (101.6 mm) dust ports.

If one intake port is unused, seal this open port using the enclosed dust intake cap.

To install dust intake cap:

Place the open end (JJ) of the intake cap rings around and on the end of one dust intake port before attaching the hose to the other. Cover the open intake port with flat intake cap (KK).

To attach the hose:

Loosely attach the hose clamp (LL) around one end of the flexible hose (MM). Attach the hose to the dust intake port (NN) and tighten the hose clamp (LL).

Use the other hose clamp to attach the other end of the flexible hose to the woodworking machine.

NOTE: Do not operate the dust collector with any dust intake port (NN) uncovered.

JJ

KK

FIG. 31

LL

MM

NN

FIG. 32

OPERATION

OPERATIONAL Controls and ADJUSTMENTS

For operator safety, make certain the dust intake port is covered with the hose before operating the machine. The rotating fan inside the blower housing is accessible through the dust intake port and is hazardous. Always wear proper apparel. Do not wear jewelry and keep fingers and all foreign objects out of the dust intake port. Always follow the safety rules of this manual.

NOTE: The dust collector is shipped with the safety switch toggle (OO) Fig. 33 removed. The toggle must be inserted into the dust collector switch and the switch placed in the "OFF" position before operation.

Remove sticker (PP) covering the switch before inserting toggle (OO) Fig. 34 into switch (QQ).

STARTING AND STOPPING DUST COLLECTOR (fig. 33)

Make sure that the switch is in the “OFF” position before plugging cord into outlet. Do not touch the plug’s metal prongs when unplugging or plugging in the cord.

The on/off switch (QQ) is located on the side of the motor. To turn the machine "ON", move the switch up to the "ON" position. To turn the machine "OFF", move the switch down to the "OFF" position.

RR

PP

OO

FIG. 33

QQ

OO

FIG. 34

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents 50-786 Important Safety Instructions Table of ContentsSafety Guidelines Definitions SAVE THESE INSTRUCTIONS Motor Specifications POWER CONNECTIONSVoltage and Circuit Protection Grounding InstructionsMinimum Gauge Extension Cord EXTENSION CORDSFunctional Description Carton ContentsUnpacking and Cleaning AssemblyAssembly Tools Required Assembly Time EstimateAttach Cross Panels to side panels Attach side panels to base FigBase fig Attach Front Panel toAttach MOTOR/BLOWER to Stand Tighten ALL Hardware Install Intake AdapterSequence Attaching Handle fIG BAG Attaching the TOP FilterAttaching the Dust Collection BAGAttaching the Hose to OperationIntake Port Starting and Stopping Dust Collector figLOCKING SWITCH in OFF POSITION Troubleshooting MaintenanceKeep Machine Clean Circuit BreakerReplacement Parts ServiceFree warning label replacement Service and RepairsWarranty AccessoriesMesures DE Sécurité Définitions LES Instructions Importantes DE SureteConsignes DE Sécurité Importantes Porter Systématiquement UN Équipement DE Sécurité Homologué Tension ET Protection DU Circuit Raccordements ÉlectriquesSpécifications DU Moteur Instructions DE Mise À LA TerreFig. C Cordon DE Rallonge Description FonctionnelleAVANT-PROPOS Désemballage ET Nettoyage Contenus DE BoiteOutils Nécessaires Pour L’ASSEMBLEE AssemblageAssemblage des roues à la base Lestimation DE Temps DassembleeTransversaux AUX Panneaux Assemblage Des PANNEAUxLatéraux fig Assemblage Du Panneau avant À LA Base figAssemblage du moteur/souffleur au pied Resserrer TOUTe La quincaillerie Dans l’ordre suivant Installation de la Buse D’ADMISSIONAssemblage de la poignée fig Assemblage DU SAC-FILTRE Supérieur Installation DU SAC ÀPoussières Fonctionnement Installation DU Tuyau À LABuse D’ADMISSION Démarrage ET Arrêt DU dépoussiéreur FigVerrouiller L’INTERRUPTEUR EN Position D’ARRÊT Depannage EntretienDisjoncteur Garder LA Machine PropreDémarrage Impossible Pièces DE Rechange Remplacement Gratuit DE LétiquetteEntretien ET Réparation Garantie AccessoiriesPautas DE SEGURIDAD/DEFINICIONES Instrucciones DE Seguridad ImportantesInstrucciones Importantes DE Seguridad Producto Voltaje y diferenciales Conexiones a LA Fuente DE AlimentaciónESPECIFICACIONES DEL MOTOR Instrucciones DE CONEXIóN a TierraL I G R O D E D E S C a R G a Cordones DE Extensión Descripción FuncionalPrologo Contenido DE Carton Herramientas DE Ensamble Requeridas EnsambleEstimación DEL Tiempo DE Ensamble Cómo Montar LAS Ruedas EN LA BaseFigura Cómo Fijar LOS Paneles Laterales a LA Base FIGFije EL MOTOR/SOPLADOR Cómo Fijar EL Panel Frontal a LA Base figAL Soporte Cómo Instalar EL Adaptador Para Admisión Apriete Todos LOS Accesorios DE Montaje EN Forma SecuencialAgarradera fig Cómo Instalar LACómo Fijar LA Bolsa Recolectora DE Polvo Cómo Fijar LA Bolsa DE Filtro SuperiorCómo Conectar LA Manguera a LA Lumbrera DE Admisión OperaciónPara Arrancar Y Detener EL Recolector DE Polvo fig Fijación DEL Interruptor EN LA Posición DE Apagado Localizacion DE Fallas MantenimientoInterruptor Automático Mantenga LA Máquina LimpiaReemplazo Gratuito DE LAS Etiquetas DE Advertencia ServicioMantenimiento Y Reparaciones Identificación Delproducto AccesoriosExcepciones Garantía limitada de cinco años para productos nuevos GarantiaPage

50-786 specifications

The Delta 50-786 is a robust and versatile benchtop bandsaw designed for both professional woodworkers and DIY enthusiasts. It combines precision engineering with advanced technology to provide users with a reliable tool for cutting a variety of materials, particularly wood.

One of the standout features of the Delta 50-786 is its powerful 1 HP motor, which ensures that users can tackle both soft and hard wood with ease. This motor is equipped with dual voltage capabilities, allowing it to operate at both 120V and 240V, making it suitable for different workshop environments. The bandsaw can make cuts up to 6 inches deep, providing ample capacity for most woodworking tasks.

The bandsaw's construction is solid and durable, featuring a heavy-duty steel frame that minimizes vibration during operation. This stability is crucial for achieving straight and accurate cuts. Additionally, the Delta 50-786 comes with a 14-inch throat capacity, which allows for cutting larger workpieces without the need for repositioning.

In terms of technology, the Delta 50-786 includes an easy-to-read LCD display that shows important settings and facilitates more precise adjustments. The bandsaw is equipped with a large table made of aluminum, which is not only lightweight but also resistant to warping. The table measures 20 inches by 27 inches, providing plenty of workspace and supporting larger materials easily.

The Delta 50-786 also features a built-in blade tracking mechanism, ensuring that the blade runs smoothly and remains aligned during operation. Blade changes are simplified with a quick-release tension lever that allows users to swap blades within minutes, minimizing downtime. This bandsaw supports a range of blade sizes, offering versatility for different cutting needs, such as resawing, crosscutting, or making intricate curves.

Safety is paramount with the Delta 50-786, which includes features like a blade guard and anti-kickback pawls, enhancing user protection during operation. The tool's design emphasizes user-friendly functionality, catering to both novices and seasoned woodworkers by making complex tasks more manageable.

In summary, the Delta 50-786 is an exemplary bandsaw that incorporates powerful performance, structured durability, and advanced technology. Its impressive features make it an essential addition to any workshop, catering to a wide range of woodworking projects and ensuring a high level of craftsmanship. Whether you are cutting intricate designs or handling hefty boards, the Delta 50-786 stands out as a reliable choice in the world of woodworking tools.
Top Page Image Contents