Bostitch 600, 650S4-1 manual Introduction, Index, Limited Warranty U.S. and Canada Only

Page 2

INTRODUCTION

The Bostitch 600,700 & 800 series staplers are precision-built tools, designed for high speed, high volume stapling. These tools will deliver efficient, dependable service when used correctly and with care. As with any fine power tool, for best performance the manufacturer’s instructions must be followed. Please study this manual before operating the tool and understand the safety warnings and cautions. The instructions on installation, operation and maintenance should be read carefully, and the manuals kept for reference. NOTE: Additional safety measures may be required because of your particular application of the tool. Contact your Bostitch representative or distributor with any questions concerning the tool and its use. Bostitch, Inc., East Greenwich, Rhode Island 02818.

INDEX

 

Safety Instructions

. . . 3

Tool Specifications

. . . 4

Air Supply: Fittings, Hoses, Filters, Air Consumption, Regulators,

 

Operating Pressure, Setting Correct Pressure

4 & 5

Lubrication

. . . 5

Loading the Tool

. . . 6

Dial-A-Depth™ Fastener Control Adjustment

. . 6

Tool Operation

7 & 8

Maintaining the Pneumatic Tool

. . . 9

Trouble Shooting

. 10

Directional Exhaust

. . 11

Quick Release Door

. . 11

Accessories

. . 11

NOTE:

Bostitch tools have been engineered to provide excellent customer satisfaction and are designed to achieve maximum performance when used with precision Bostitch fasteners engineered to the same exacting standards. Bostitch cannot assume responsibility for product performance if our tools are used with fasteners or accessories not meeting the specific requirements established for genuine Bostitch nails, staples and accessories.

LIMITED WARRANTY — U.S. and Canada Only

Effective December 1, 2005 Bostitch, L.P. warrants to the original retail purchaser that the product purchased is free from defects in material and workmanship, and agrees to repair or replace, at Bostitch’s option, any defective Bostitch branded pneumatic stapler or nailer for a period of seven (7) years from date of purchase (one (1) year from the date of purchase for compressors and tools used in production applications). Warranty is not transferable. Proof of purchase date required. This warranty covers only damage resulting from defects in material or workmanship; it does not cover conditions or malfunctions resulting from normal wear, neglect, abuse, accident or repairs attempted or made by other than our national repair center or authorized warranty service centers. Driver blades, bumpers, o-rings, pistons and piston rings are considered normally wearing parts. For optimal performance of your Bostitch tool always use genuine Bostitch fasteners and replacement parts.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. BOSTITCH SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.

Some states and countries do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state and country to country.

To obtain warranty service in the U.S. return the product, together with proof of purchase, to the U.S. Bostitch National or Regional Independent Authorized Warranty Service Center. In the U.S. you may call us at 1-800-556-6696 or visit www.BOSTITCH.com for the location most convenient for you. In Canada please call us at 800-567-7705 or visit www.BOSTITCH.com

-2-

Page 1 Page 3
Image 2
Page 1 Page 3
Contents 600, 700 & 800 Series Index Limited Warranty U.S. and Canada OnlyIntroduction Loading Tool Safety InstructionsAIR Supply and Connections Operation600, 700 & 800 Series Tool Specifications Lubrication Loading the 600,700 DIAL-A-DEPTH Fastener Control AdjustmentTo Adjust DIAL-A Depth Fastener Control Adjustment To Prevent Accidental InjuriesTrigger Operation Tool OperationBefore Handling or Operating this Tool Contact Trip OperationTool Must not Cycle Tool Operation CheckTrigger Operated Tool Tool Must CycleAIR SUPPLY-PRESSURE and Volume Replacement PartsAssembly Procedure for Seals Maintaining the Pneumatic ToolTrouble Shooting Problem Cause CorrectionQuick Release Magazine Accessories AvailableDirectional Exhaust Deflector Recommended ToolsNota IntroducciónÍndice Garantía Limitada Sólo EE.UU. y CanadáAL Cargar LA Herramienta Instrucciones DE SeguridadSuministro DE Aire Y Conexiones OperaciónEspecificaciones DE LAS Herramientas Series 600, 700 Y Lubricación Para Ajustar EL Control DE Engrapado DIAL-A-DEPTH Cómo Cargar EL 600, 700 YAjuste DE Control Para Engrapar DIAL-A-DEPTH Advertencia Para Impedir Lesiones AccidentalesOperación DE Disp ARO POR Contacto Operación DE LA HerramientaAntes DE Manejar U Operar Esta Herramienta Operación DE Disp ARO SecuencialOperación POR Disp ARO Secuencial Verificación DE LA Operación DE LA HerramientaHerramienta Operada POR Gatillo LA Herramienta no Debe Efectuar SU CicloPartes DE Reemplazo Presión Y Volumen DEL Suministro DE AireMantenimiento DE LA Herramienta Neumática Procedimiento DE Ensamble Para LOS SellosCausa Corrección ProblemaDiagnóstico DE Falla Accesorios Disponibles Deflector DE Escape DireccionalDepósito DE Liberación Rápida Herramientas RecomendadasGarantie Limitée É.-U. et Canada seulement SommaireRemarque Chargement DE L’APPAREIL Consignes DE SécuritéAlimentation EN AIR Comprimé ET Raccordement FonctionnementDonnées Techniques DES Outils DES Séries 600, 700 ET OpérationLubrification Pour Prévenir UN Accident Commande DE Réglage DES Attaches DIAL-A-DEPTHChargement EL 600, 700 ET Avant DE Manipuler OU D’UTILISER CET Outil Mode D’EMPLOIFonctionnement DE L’APPAREIL Système DE Sécurité À LA Volée Vérification DU Système DE DéclenchementDéclenchement P AR LA Détente Système DE Sécurité AU COUP-PAR-COUPProcédure D’ASSEMBLAGE DES Garnitures Alimentation D’AIR Pression VolumePièces DE Rechange Problèmes DE Fonctionnement Problème Cause CorrectionDéflecteur D’ÉCHAPPEMENT Directionnel Accessoires DisponiblesOutils Recommandés Magasin À Dégagement Rapide

600, 650S4-1 specifications

The Bostitch 650S4-1,600 is an advanced pneumatic stapler designed for a wide range of fastening tasks in both professional and DIY settings. Built for durability and efficiency, this tool delivers high performance while maintaining user comfort, making it a preferred choice among contractors and woodworkers alike.

One of the standout features of the Bostitch 650S4-1,600 is its robust construction, designed to withstand the rigors of daily use. The stapler operates on a pneumatic system, requiring an air compressor to provide power, which allows it to deliver consistent performance without the need for batteries or electricity. This feature makes it not only reliable but also ideal for outdoor jobs where power sources are limited.

The stapler has a magazine capacity that holds up to 160 staples, minimizing the need for frequent reloads and allowing users to work more efficiently. It is compatible with a variety of Bostitch staples, specifically 18-gauge and ¾-inch crown staples, which are perfect for applications like upholstery, insulation, woodworking, and general construction. This versatility further enhances its appeal, making it suitable for various projects.

Another significant characteristic of the Bostitch 650S4-1,600 is its adjustable depth control, which allows users to set the stapler to drive staples to the desired depth into different materials. This feature helps in achieving clean and precise fastening, especially when working with materials of varying thicknesses. The staple exit is designed to minimize jamming, making operation smoother and reducing downtime during tasks.

In terms of safety, the Bostitch 650S4-1,600 incorporates a trigger safety mechanism that prevents accidental firing. This added layer of protection is crucial, especially in busy work environments where multiple users may be present. The integrated rubber grip provides comfort and control, reducing hand fatigue during prolonged use.

Additionally, the unit is also lightweight, which enhances maneuverability and ease of use, especially when tackling overhead projects or tight spaces. With its combination of power, precision, and flexibility, the Bostitch 650S4-1,600 stands out in the realm of pneumatic staplers, making it an excellent investment for anyone in need of a reliable fastening solution.
Top Page Image Contents