SECTION 5 − OPERATION
5-1. Controls
2
1
3
4
Ref. 220
1 Voltage Control
.Positions 4, 5, and 6 are for 230 volts ac input only.
Set Voltage control according to the parameter chart for good starting point. Turn control clockwise to increase voltage.
2 Wire Speed Control
Set Wire Speed control according to the parameter chart. Increase or decrease wire speed to obtain desired bead profile and travel speed.
3Power Switch/Supplementary Protector
The switch energizes the main transformer and control circuitry. The 20 ampere supplementary protector protects the unit from overload.
4 MIG Gun Receptacle