Miller Electric 301 G, DC manual Close valve and valve cap, Before adding oil, Running engine

8-6. Changing Engine Oil, Oil Filter, and Fuel Filter (Robin EH64-Powered Units)

		Y	Stop engine and let cool.
		1	Oil Drain Valve
		2	Oil Filter
		Change engine oil and filter accord-
		ing to engine owner’s manual.
		Y Close valve and valve cap
			before adding oil and
			running engine.
		Fill crankcase with new oil to full
		mark on dipstick (see Section 8-1).
		3	Fuel Filter
Oil Check	Oil Fill	4	Fuel Line
		Replace line if cracked or worn.
		Install new filter. Wipe up any spilled
		fuel.
		Start engine, and check for fuel
Full		leaks.
		Y	Stop engine, tighten connec-

tions as necessary, and wipe up fuel.

3

4

2

1

Tools Needed:

803 098 / S-0842

OM-4407 Page 34