DeWalt D25601 instruction manual Voltage Volts Total length of cord in meters m

Page 4

•Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.

•Wear safety goggles or other eye protection. Hammering operations cause chips to fly. Flying particles can cause permanent eye damage. Wear a dust mask or respirator for applications that generate dust. Ear protection may be required for most applications.

•Keep a firm grip on the tool at all times. Do not attempt to operate this tool without holding it with both hands. It is recommended that the side handle be used at all times. Operating this tool with one hand will result in loss of control. Breaking through or encountering hard materials such as re-bar may be hazardous as well. Tighten the side handle securely before use.

•Do not operate this tool for long periods of time. Vibration caused by hammer action may be harmful to your hands and arms. Use gloves to provide extra cushion and limit exposure by taking frequent rest periods.

•Do not recondition bits yourself. Chisel reconditioning should be done by an authorized specialist. Improperly reconditioned chisels could cause injury.

•Wear gloves when operating tool or changing bits. Accessible metal parts on the tool and bits may get extremely hot during operation. Small bits of broken material may damage bare hands.

•Never lay the tool down until the bit has come to a complete stop. Moving bits could cause injury.

•Do not strike jammed bits with a hammer to dislodge them. Fragments of metal or material chips could dislodge and cause injury.

•Slightly worn chisels can be resharpened by grinding.

NOTE: Do not overheat the bit (discoloration) while grinding a new edge. Badly worn chisels require reforging. Do not reharden and temper the chisel.

•Keep the power cord away from the rotating bit. Do not wrap the cord around any part of your body. An electric cord wrapped around a spinning bit may cause personal injury and loss of control.

•Air vents often cover moving parts and should be avoided. Loose clothes, jewellery or long hair can be caught in moving parts.

•An extension cord must have adequate wire size for safety. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. When using more than one extension to make up the total length, be sure each individual extension contains at least the minimum wire size. The following table shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gauge. The smaller the gauge number, the heavier the cord.

Voltage (Volts)

Total length of cord in meters (m)

 

 

 

 

 

 

 

 

120

- 127V

0 - 7

 

7 - 15

15 - 30

 

30 - 50

 

 

 

 

 

 

 

220

- 240V

0 - 15

 

15 - 30

30 - 60

60 - 100

 

 

 

 

 

Rated Ampere

Minimal cross-sectional area of the

range

 

cord in meters (mm2 )

 

0

- 6A

1.0

 

1.5

1.5

 

2.5

6

- 10A

1.0

 

1.5

2.5

 

4.0

10

- 12A

1.5

 

1.5

2.5

 

4.0

12

- 16A

2.5

 

4.0

Not Recommended

English

3

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Page Definitions Safety Guidelines General Power Tool Safety WarningsWork Area Safety Electrical SafetyPower Tool USE and Care Additional Safety Instructions for Rotary HammersService Voltage Volts Total length of cord in meters m Motor Components FigAssembly and Adjustments Side Handle FigIntended USE To Mount in Front Position FIGActive Vibration Control Fig Inserting and Removing Spline Drive Accessories FigTo Mount in Rear Position FIG Complete Torque Control Fig Inserting and Removing SDS Max AccessoriesElectronic Speed and Impact Control Fig Mode Selector Fig Power Indicator Lights FigTrigger Switch Fig OperationHammerdrilling with a Solid Bit Soft Start FeatureHammerdrilling with a Core Bit Maintenance Cleaning LubricationAccessories ChippingSpecifications RepairsSeguridad DEL Área DE Trabajo Definiciones Normas De seguridadSeguridad Eléctrica Seguridad Personal USO Y Mantenimiento DE LA Herramienta EléctricaMantenimiento Ténsion Volts Longitud del cable en metros m Descripción Fig USO DebidoMango lateral Fig Montaje Y AjustesMontaje EN LA Posición Delantera FIG Inserción y desmontaje de accesorios estriados Fig Control de vibración activa FigMontaje EN LA Posición Trasera FIG Inserción y desmontaje de accesorios SDS Max Control completo del par de torsión FigControl electrónico de la velocidad y el impacto Fig Selector de modo FigLuces indicadoras de energía Fig FuncionamientoBien colocar las manos Fig Interruptor de gatillo FigTaladrado con brocas sólidas Función DE Arranque ProgresivoBurilado Taladrado con barrenas huecasMantenimiento Limpieza LubricaciónAccesorios ReparacionesEspecificaciones D25602-ARRegras Gerais de Segurança Definições Diretrizes de SegurançaGuarde Estas Instruções USO E Cuidados DA Ferramenta Instruções de segurança adicionais para marteletes rotativos ReparosTensão Comprimento do cabo de extensão Minutos Corrente alternada Corrente contínua Montagem E Ajustes Componentes FigEmpunhadura lateral Fig Controle de vibração ativa Fig Como instalar e retirar acessórios para ranhuras FigControle de torque completo Fig Como instalar e retirar acessórios SDS MaxControle eletrônico de velocidade e impacto Fig Indicadores luminosos de alimentação elétrica Fig Seletor de Modo FigComo Operar a Ferramenta Como segurar corretamente a ferramenta Fig Gatilho interruptor FigMartelamento com uma broca sólida Função DE Partida SuaveRaspagem Perfuração por percussão com uma broca-coroaManutenção Limpeza LubrificaçãoAcessórios ReparosEspecificações Copyright @ 2010 D Ewalt

D25601 specifications

The DeWalt D25601 is a powerful and robust demolition hammer designed for professionals who require efficiency and durability in their heavy-duty tasks. This tool is perfect for a range of applications, including chipping, digging, and breaking up concrete, asphalt, and other tough materials. Its exceptional performance makes it a must-have for contractors, electricians, and everyday DIY enthusiasts.

One of the standout features of the D25601 is its high-impact energy. With a remarkable 19.2 joules of impact energy, this hammer delivers exceptional performance, making it easier to break through even the hardest materials. The large hammer mechanism optimizes both energy consumption and impact force, allowing users to complete tough jobs in less time.

The D25601 is equipped with a powerful 1700-watt motor that provides reliable power and performance. This motor ensures consistent power delivery, whether you’re working on horizontal or vertical surfaces. Additionally, the electronic speed control allows users to set and maintain the desired speed during operation, enhancing precision and control.

Another key technology integrated into the D25601 is its anti-vibration system. This innovative feature significantly reduces user fatigue and discomfort during extended use. By minimizing vibrations, users can work longer and more comfortably, enhancing productivity without compromising safety.

The demolition hammer’s durability is further enhanced by its robust construction. It features a heavy-duty housing that protects the internal components from wear and tear, ensuring a long lifespan even in the harshest working conditions. The D25601 is designed to withstand the rigors of daily job site use.

User convenience is also a priority in the design of the D25601. The tool is equipped with a service indicator that alerts users when maintenance is required, minimizing downtime. The adjustable side handle provides improved grip and control, and the depth rod allows for precise and consistent chipping depth, making a variety of applications easier to manage.

In summary, the DeWalt D25601 demolition hammer stands out due to its powerful performance, advanced technologies, and user-friendly features. Whether you’re tackling a large construction project or a home renovation, this demolition hammer delivers the reliability and efficiency needed to get the job done effectively. With its focus on performance and durability, the D25601 is an investment that professionals in the field can rely on for years to come.
Top Page Image Contents