DeWalt D25601 Hammerdrilling with a Solid Bit, Hammerdrilling with a Core Bit, Soft Start Feature

Page 10

D25602

In chipping mode only, lock the trigger switch on, push the lock-on slider (B) upwards while depressing the trigger switch.

To deactivate the lock-on slider, depress the trigger switch once then release.

The lock-on slider may only be activated in chipping mode. The machine will stop running when trying to engage the lock-on slider in hammerdrilling mode. The motor will stop if the lock-on slider is activated when changing from chisel mode into hammerdrilling mode.

D25831, D25851

For continuous operation, move the toggle switch to the on position. To stop continuous operation, move the toggle switch to the off position.

SOFT START FEATURE

The soft start feature allows you to build up speed slowly, thus preventing the drill bit from walking off the intended hole position when starting. The soft start feature also reduces the immediate torque reaction transmitted to the gearing and the operator if the hammer is started with the drill bit in an existing hole.

Hammerdrilling with a Solid Bit

D25501, D25601, D25602

NOTE: The D25831, D25851 has only chipping modes with no hammerdrilling capability.

1.Set the mode selector (F) to hammerdrilling mode.

2.For D25602 only, move the torque control lever (U) to Setting 1

(S).

3.Set the speed and impact control dial (G).

4.Insert the appropriate drill bit.

5.Adjust the side handle (front or rear position) (C).

6.Mark the spot where the hole is to be drilled.

7.Place the drill bit on that mark and depress the trigger switch

(A).

8.Apply only enough pressure to engage active vibration control (refer to Active Vibration Control).

9.To stop the tool, release the trigger switch. Always turn the tool off when work is finished and before unplugging.

Hammerdrilling with a Core Bit

D25501, D25601, D25602

CAUTION: Do not use a core bit for hammerdrilling wood. Personal injury and damage to tool may result.

NOTE: The D25831, D25851 has only chipping modes with no hammerdrilling capability.

1.Set the mode selector (F) to hammerdrilling mode.

2.For D25602 only, move the torque control lever (U) to Setting 2

(T).

3.Turn the speed and impact control dial (G) to the maximum speed (level 7).

4.Adjust the side handle (front or rear position) (C).

5.Assemble the centering bit and adapter shank into core bit.

6.Mark the spot where the hole is to be drilled.

7.Place the centering bit on that mark and depress the trigger switch (A).

NOTE: Some core drills require the removal of centering bit after about 1 cm of penetration. If so, remove and continue hammerdrilling.

8.When hammerdrilling through a structure thicker than the depth of the core bit, break away the round cylinder of concrete or core inside the bit at regular intervals. To avoid unwanted breaking away of concrete around the hole, first drill

English

9

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Page Work Area Safety Definitions Safety GuidelinesGeneral Power Tool Safety Warnings Electrical SafetyPower Tool USE and Care Additional Safety Instructions for Rotary HammersService Voltage Volts Total length of cord in meters m Motor Components FigIntended USE Assembly and AdjustmentsSide Handle Fig To Mount in Front Position FIGActive Vibration Control Fig Inserting and Removing Spline Drive Accessories FigTo Mount in Rear Position FIG Complete Torque Control Fig Inserting and Removing SDS Max AccessoriesElectronic Speed and Impact Control Fig Trigger Switch Fig Mode Selector FigPower Indicator Lights Fig OperationHammerdrilling with a Solid Bit Soft Start FeatureHammerdrilling with a Core Bit Accessories MaintenanceCleaning Lubrication ChippingSpecifications RepairsSeguridad DEL Área DE Trabajo Definiciones Normas De seguridadSeguridad Eléctrica Seguridad Personal USO Y Mantenimiento DE LA Herramienta EléctricaMantenimiento Ténsion Volts Longitud del cable en metros m Descripción Fig USO DebidoMango lateral Fig Montaje Y AjustesMontaje EN LA Posición Delantera FIG Inserción y desmontaje de accesorios estriados Fig Control de vibración activa FigMontaje EN LA Posición Trasera FIG Inserción y desmontaje de accesorios SDS Max Control completo del par de torsión FigLuces indicadoras de energía Fig Control electrónico de la velocidad y el impacto FigSelector de modo Fig FuncionamientoTaladrado con brocas sólidas Bien colocar las manos FigInterruptor de gatillo Fig Función DE Arranque ProgresivoBurilado Taladrado con barrenas huecasMantenimiento Accesorios LimpiezaLubricación ReparacionesEspecificaciones D25602-ARRegras Gerais de Segurança Definições Diretrizes de SegurançaGuarde Estas Instruções USO E Cuidados DA Ferramenta Instruções de segurança adicionais para marteletes rotativos ReparosTensão Comprimento do cabo de extensão Minutos Corrente alternada Corrente contínua Montagem E Ajustes Componentes FigEmpunhadura lateral Fig Controle de vibração ativa Fig Como instalar e retirar acessórios para ranhuras FigControle de torque completo Fig Como instalar e retirar acessórios SDS MaxControle eletrônico de velocidade e impacto Fig Indicadores luminosos de alimentação elétrica Fig Seletor de Modo FigComo Operar a Ferramenta Martelamento com uma broca sólida Como segurar corretamente a ferramenta FigGatilho interruptor Fig Função DE Partida SuaveRaspagem Perfuração por percussão com uma broca-coroaManutenção Acessórios LimpezaLubrificação ReparosEspecificações Copyright @ 2010 D Ewalt

D25601 specifications

The DeWalt D25601 is a powerful and robust demolition hammer designed for professionals who require efficiency and durability in their heavy-duty tasks. This tool is perfect for a range of applications, including chipping, digging, and breaking up concrete, asphalt, and other tough materials. Its exceptional performance makes it a must-have for contractors, electricians, and everyday DIY enthusiasts.

One of the standout features of the D25601 is its high-impact energy. With a remarkable 19.2 joules of impact energy, this hammer delivers exceptional performance, making it easier to break through even the hardest materials. The large hammer mechanism optimizes both energy consumption and impact force, allowing users to complete tough jobs in less time.

The D25601 is equipped with a powerful 1700-watt motor that provides reliable power and performance. This motor ensures consistent power delivery, whether you’re working on horizontal or vertical surfaces. Additionally, the electronic speed control allows users to set and maintain the desired speed during operation, enhancing precision and control.

Another key technology integrated into the D25601 is its anti-vibration system. This innovative feature significantly reduces user fatigue and discomfort during extended use. By minimizing vibrations, users can work longer and more comfortably, enhancing productivity without compromising safety.

The demolition hammer’s durability is further enhanced by its robust construction. It features a heavy-duty housing that protects the internal components from wear and tear, ensuring a long lifespan even in the harshest working conditions. The D25601 is designed to withstand the rigors of daily job site use.

User convenience is also a priority in the design of the D25601. The tool is equipped with a service indicator that alerts users when maintenance is required, minimizing downtime. The adjustable side handle provides improved grip and control, and the depth rod allows for precise and consistent chipping depth, making a variety of applications easier to manage.

In summary, the DeWalt D25601 demolition hammer stands out due to its powerful performance, advanced technologies, and user-friendly features. Whether you’re tackling a large construction project or a home renovation, this demolition hammer delivers the reliability and efficiency needed to get the job done effectively. With its focus on performance and durability, the D25601 is an investment that professionals in the field can rely on for years to come.
Top Page Image Contents