DeWalt D25601 Mode Selector Fig, Power Indicator Lights Fig, Operation, Proper Hand Position Fig

Page 9

English

Mode Selector (Fig. 1)

CAUTION: Never change the mode while the unit is running. CAUTION: Do not change to hammerdrill mode with chisel bit in

tool holder. Personal injury and damage to tool may result.

The D25501, D25553, D25601, D25602 uses two operating modes. To select the required operating mode, rotate the mode selector (F) until the arrow points to the hammerdrilling or the chipping icon. The D25831 uses only the chipping mode.

HAMMERDRILLING MODE ()

The tool simultaneously rotates and impacts the work. This mode is appropriate for all concrete and masonry operations.

CHIPPING MODE ()

The spindle lock is engaged during chipping mode so the tool impacts the work without rotating. This mode is appropriate for light chipping, chiseling and demolition applications.

NOTE: In chipping mode, the hammerdrill can also be used as a lever to free a jammed drill bit.

CHISEL BIT ADJUSTMENT ( )

Turn the mode selector to one of the chisel bit adjustment icons to adjust the chisel to the desired position. There are 18 possible positions to set the angle of the chisel. After finding the desired position, slightly maneuver the chisel bit back and forth to ensure the chisel is properly engaged.

Power Indicator Lights (Fig. 5)

The yellow brushwear indicator LED (V) lights up when the carbon brushes are nearly worn out indicating that the tool needs servicing within the next 8 hours of use.

The red indicator LED (W) lights up if the lock-on slider (B) is used in any mode except the chipping mode.

The red indicator LED (W) flashes if there is a fault with the tool or if the brushes are completely worn (refer to Brushes under Maintenance).

OPERATION

WARNING: Always observe the safety instructions and applicable regulations.

WARNING: To reduce the risk of serious personal injury, turn tool off and disconnect tool from power source before making any adjustments or removing/installing attachments or accessories.

WARNING: To reduce the risk of personal injury, ALWAYS ensure workpiece is anchored or clamped firmly. If drilling thin material, use a wood “back-up” block to prevent damage to the material.

WARNING: To reduce the risk of personal injury, ALWAYS operate the tool with the side handle properly installed and securely tightened. Failure to do so may result in the side handle slipping during tool operation and subsequent loss of control. Hold tool with both hands to maximize control.

Proper Hand Position (Fig. 1)

WARNING: To reduce the risk of serious personal injury, ALWAYS use proper hand position as shown.

WARNING: To reduce therisk of serious personal injury, ALWAYS hold securely in anticipation of a sudden reaction.

Proper hand position requires one hand on the side handle (C), with the other hand on the main handle (D).

NOTE: Operating temperature of this tool is 19˚ to 104˚ F (-7 to +40˚ C). Using the tool outside of this temperature range will decrease the life of the tool.

Trigger Switch (Fig. 1)

To turn the tool on, depress the trigger switch (A). To stop the tool, release the trigger switch.

8

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Page General Power Tool Safety Warnings Definitions Safety GuidelinesWork Area Safety Electrical SafetyAdditional Safety Instructions for Rotary Hammers Power Tool USE and CareService Voltage Volts Total length of cord in meters m Components Fig MotorSide Handle Fig Assembly and AdjustmentsIntended USE To Mount in Front Position FIGInserting and Removing Spline Drive Accessories Fig Active Vibration Control FigTo Mount in Rear Position FIG Inserting and Removing SDS Max Accessories Complete Torque Control FigElectronic Speed and Impact Control Fig Power Indicator Lights Fig Mode Selector FigTrigger Switch Fig OperationSoft Start Feature Hammerdrilling with a Solid BitHammerdrilling with a Core Bit Cleaning Lubrication MaintenanceAccessories ChippingRepairs SpecificationsDefiniciones Normas De seguridad Seguridad DEL Área DE TrabajoSeguridad Eléctrica USO Y Mantenimiento DE LA Herramienta Eléctrica Seguridad PersonalMantenimiento Ténsion Volts Longitud del cable en metros m USO Debido Descripción FigMontaje Y Ajustes Mango lateral FigMontaje EN LA Posición Delantera FIG Control de vibración activa Fig Inserción y desmontaje de accesorios estriados FigMontaje EN LA Posición Trasera FIG Control completo del par de torsión Fig Inserción y desmontaje de accesorios SDS MaxSelector de modo Fig Control electrónico de la velocidad y el impacto FigLuces indicadoras de energía Fig FuncionamientoInterruptor de gatillo Fig Bien colocar las manos FigTaladrado con brocas sólidas Función DE Arranque ProgresivoTaladrado con barrenas huecas BuriladoMantenimiento Lubricación LimpiezaAccesorios ReparacionesD25602-AR EspecificacionesDefinições Diretrizes de Segurança Regras Gerais de SegurançaGuarde Estas Instruções USO E Cuidados DA Ferramenta Reparos Instruções de segurança adicionais para marteletes rotativosTensão Comprimento do cabo de extensão Minutos Corrente alternada Corrente contínua Componentes Fig Montagem E AjustesEmpunhadura lateral Fig Como instalar e retirar acessórios para ranhuras Fig Controle de vibração ativa FigComo instalar e retirar acessórios SDS Max Controle de torque completo FigControle eletrônico de velocidade e impacto Fig Seletor de Modo Fig Indicadores luminosos de alimentação elétrica FigComo Operar a Ferramenta Gatilho interruptor Fig Como segurar corretamente a ferramenta FigMartelamento com uma broca sólida Função DE Partida SuavePerfuração por percussão com uma broca-coroa RaspagemManutenção Lubrificação LimpezaAcessórios ReparosEspecificações Copyright @ 2010 D Ewalt

D25601 specifications

The DeWalt D25601 is a powerful and robust demolition hammer designed for professionals who require efficiency and durability in their heavy-duty tasks. This tool is perfect for a range of applications, including chipping, digging, and breaking up concrete, asphalt, and other tough materials. Its exceptional performance makes it a must-have for contractors, electricians, and everyday DIY enthusiasts.

One of the standout features of the D25601 is its high-impact energy. With a remarkable 19.2 joules of impact energy, this hammer delivers exceptional performance, making it easier to break through even the hardest materials. The large hammer mechanism optimizes both energy consumption and impact force, allowing users to complete tough jobs in less time.

The D25601 is equipped with a powerful 1700-watt motor that provides reliable power and performance. This motor ensures consistent power delivery, whether you’re working on horizontal or vertical surfaces. Additionally, the electronic speed control allows users to set and maintain the desired speed during operation, enhancing precision and control.

Another key technology integrated into the D25601 is its anti-vibration system. This innovative feature significantly reduces user fatigue and discomfort during extended use. By minimizing vibrations, users can work longer and more comfortably, enhancing productivity without compromising safety.

The demolition hammer’s durability is further enhanced by its robust construction. It features a heavy-duty housing that protects the internal components from wear and tear, ensuring a long lifespan even in the harshest working conditions. The D25601 is designed to withstand the rigors of daily job site use.

User convenience is also a priority in the design of the D25601. The tool is equipped with a service indicator that alerts users when maintenance is required, minimizing downtime. The adjustable side handle provides improved grip and control, and the depth rod allows for precise and consistent chipping depth, making a variety of applications easier to manage.

In summary, the DeWalt D25601 demolition hammer stands out due to its powerful performance, advanced technologies, and user-friendly features. Whether you’re tackling a large construction project or a home renovation, this demolition hammer delivers the reliability and efficiency needed to get the job done effectively. With its focus on performance and durability, the D25601 is an investment that professionals in the field can rely on for years to come.
Top Page Image Contents