DeWalt D25601 Active Vibration Control Fig, Inserting and Removing Spline Drive Accessories Fig

Page 7

English

5.Rotate the side handle mounting assembly to the desired position. For hammerdrilling horizontally with a heavy drill bit, place the side handle assembly at an angle of approximately 20° to the tool for optimum control.

6.Lock the side handle mounting assembly in place by tightening the clamp knob (H).

TO MOUNT IN REAR POSITION (FIG. 3)

1.Unscrew the side handle (C) and remove it from the side handle mounting assembly. Leave the side handle mounting assembly in the front position.

2.Screw the side handle directly into one of the rear side handle positions (I) on either side of the tool.

FIG. 2	M	FIG. 3	I
			I
K

N O

P L

J

H

C

C

Active Vibration Control (Fig. 1)

D25602, D25831, D25851

For best vibration control, hold the tool with one hand on the main handle (D) and the other hand on the side handle (C). Apply just enough pressure so the damping device on the main handle is approximately midstroke. The hammer only needs enough pressure to engage the active vibraton control. Applying too much pressure will not make the tool drill or chip faster and active vibration control will not engage.

FIG. 4	M	R
	M

Q

P

Inserting and Removing Spline Drive Accessories (Fig. 4)

D25851

WARNING: To reduce the risk of serious personal injury, turn tool off and disconnect tool from power source before making any adjustments or removing/installing attachments or accessories.

1.Insert the bit shank into the tool holder (M) as far as it will go. The groove on the chisel shank (Q) must be aligned with the

6

Image 7

Contents Page Electrical Safety Definitions Safety GuidelinesGeneral Power Tool Safety Warnings Work Area SafetyPower Tool USE and Care Additional Safety Instructions for Rotary HammersService Voltage Volts Total length of cord in meters m Components Fig MotorTo Mount in Front Position FIG Assembly and AdjustmentsSide Handle Fig Intended USEActive Vibration Control Fig Inserting and Removing Spline Drive Accessories FigTo Mount in Rear Position FIG Complete Torque Control Fig Inserting and Removing SDS Max AccessoriesElectronic Speed and Impact Control Fig Operation Mode Selector FigPower Indicator Lights Fig Trigger Switch FigHammerdrilling with a Solid Bit Soft Start FeatureHammerdrilling with a Core Bit Chipping MaintenanceCleaning Lubrication AccessoriesRepairs SpecificationsSeguridad DEL Área DE Trabajo Definiciones Normas De seguridadSeguridad Eléctrica USO Y Mantenimiento DE LA Herramienta Eléctrica Seguridad PersonalMantenimiento Ténsion Volts Longitud del cable en metros m USO Debido Descripción FigMango lateral Fig Montaje Y AjustesMontaje EN LA Posición Delantera FIG Inserción y desmontaje de accesorios estriados Fig Control de vibración activa FigMontaje EN LA Posición Trasera FIG Control completo del par de torsión Fig Inserción y desmontaje de accesorios SDS MaxFuncionamiento Control electrónico de la velocidad y el impacto FigSelector de modo Fig Luces indicadoras de energía FigFunción DE Arranque Progresivo Bien colocar las manos FigInterruptor de gatillo Fig Taladrado con brocas sólidasBurilado Taladrado con barrenas huecasMantenimiento Reparaciones LimpiezaLubricación AccesoriosD25602-AR EspecificacionesRegras Gerais de Segurança Definições Diretrizes de SegurançaGuarde Estas Instruções USO E Cuidados DA Ferramenta Reparos Instruções de segurança adicionais para marteletes rotativosTensão Comprimento do cabo de extensão Minutos Corrente alternada Corrente contínua Montagem E Ajustes Componentes FigEmpunhadura lateral Fig Como instalar e retirar acessórios para ranhuras Fig Controle de vibração ativa FigControle de torque completo Fig Como instalar e retirar acessórios SDS MaxControle eletrônico de velocidade e impacto Fig Indicadores luminosos de alimentação elétrica Fig Seletor de Modo FigComo Operar a Ferramenta Função DE Partida Suave Como segurar corretamente a ferramenta FigGatilho interruptor Fig Martelamento com uma broca sólidaRaspagem Perfuração por percussão com uma broca-coroaManutenção Reparos LimpezaLubrificação AcessóriosEspecificações Copyright @ 2010 D Ewalt