Sanyo UHX0752 How to invalidate the program timer, How to cancel the program timer invalidation

Remote Control Functions

3. Timer Remote Controller (RCS-TM80BG)

Deleting the Program Timer

To delete the program timer setting, follow the steps below.

1.	Press		to enter the program confirmation mode.
2.	Press	/		to select the day of the program you want to de-
	lete.
3.	Press	/		to select a TIMER No. (from 1 to 6).
4.	Press		to display the program setting mode .
5.	Press		to delete the program.

Note

After deleting, the unit returns to the program confi rmation mode .

If you press during the setting, the unit returns to the program confi rmation mode.

If there is no operation made for 3 minutes during the setting, the unit re- turns to the normal mode.

Invalidating Program Timer

5 3 4 1 2

If you want to adjourn the program operation for more than 1 week, you can invalidate all the timer settings.

Once the timer settings are invalidated, the program will not be operated until the invalidation is cancelled.

<<How to invalidate the program timer>>

Press and hold for more than 2 seconds.

is displayed and the programs will be invalidated from the next one.

<<How to cancel the program timer invalidation>>

Press and hold for more than 2 seconds.

disappears and the programs will be validated from the next one.

If Power Failure Occurred

If the power recovers in a short time period, the program after the recovered time will be valid.

If the power recovered more than 1 hour after the failure, the present time information will be lost. In this case, the program will not be operated.

2-25

1

1

2

2

3

3

4

4

5

5

6

6

7

7

8

8