Dremel 100 Assembly, Shaft Lock Button, To to Tighten Loosen, Rings, Collet Identification Chart

Page 9

DM 2610015339 05-11:DM 2610015339 05-11.qxp 5/12/11 9:40 AM Page 9

 

 

Assembly

 

 

Always unplug Rotary Tool before changing accessories, changing collets

 

! WARNING

 

 

or servicing your Rotary Tool.

 

 

SHAFT

LOCK

BUTTON

COLLET

COLLET

WRENCH

NUT

 

TO TO

TIGHTEN LOOSEN

COLLET NUT — To loosen, first press shaft lock button and rotate the shaft by hand until the lock engages the shaft preventing further rotation.

!CAUTION Do not engage lock while the Rotary Tool is running.

With the shaft lock engaged use the collet wrench to loosen the collet nut if necessary. The collet nut must be loosely threaded on when inserting an accessory. Change accessories by inserting the new one into the collet as far as possible to minimize runout and unbalance. With the shaft lock engaged, finger tighten the collet nut until the accessory shank

EZ TWIST™

INTEGRATED

WRENCH/NOSE

CAP

COLLET

NUT

TOTO

TIGHTEN LOOSEN

is gripped by the collet. Avoid excessive tightening of the collet nut when there is no bit inserted.

EZ TWIST™ INTEGRATED WRENCH/NOSE CAP (Model 3000 only)

The nose cap of your tool has an integrated wrench allowing you to loosen and tighten the collet nut without the use of the standard collet wrench. Unscrew the nose cap from the tool, line-up steel insert on inside of cap with collet nut. With the shaft lock engaged twist nose cap clockwise to tighten, and counter- clockwise to loosen.

COLLETS — Four different size collets (see illustration), to accommodate different shank sizes, are available for your Rotary Tool. To

 

480

 

 

 

1/8"

 

 

COLLET

COLLET

 

 

 

 

 

NUT

 

 

 

 

 

 

IDENTIFICATION

 

 

 

RINGS

 

481

 

 

 

3/32"

482

483

 

COLLET

 

1/16"

1/32"

 

 

 

 

COLLET

COLLET

install a different collet, remove the collet nut and remove the old collet. Insert the unslotted end of the collet in the hole in the end of the tool shaft. Replace collet nut on the shaft.

Always use the collet which ! CAUTION matches the shank size of

the accessory you plan to use. Never force a larger diameter shank into a collet.

Note: Most rotary tool kits do not include all four collets sizes.

COLLET IDENTIFICATION CHART

Collet sizes can be identified by the rings on the back end of collet.

1/32" Collet has one (1) ring. 1/16" Collet has two (2) rings. 3/32" Collet has three (3) rings.

1/8" Collet has no rings. (Included in most tool kits on the tool)

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents See Voir Ver la página Box 1468 Racine, WisconsinWork area safety General Power Tool Safety WarningsElectrical safety Personal safetyService Safety Rules for Rotary ToolsSafety Rules for Rotary Tools Some dust created by power Additional Safety WarningsName Designation/Explanation SymbolsSymbols Models 100 Functional Description and SpecificationsHigh Speed Rotary Tools 100 Single Speed ModelCollet Identification Chart AssemblyShaft Lock Button To to Tighten LoosenOperating Instructions Using the Rotary ToolSharpen Tools Shape WoodFIG. a Questions or Problems? Call Operating SpeedsUse only Dremel, high-performance Accessories Needs for Slower SpeedsLet speed do the work Maintenance of Replaceable Maintenance InformationCarbon Brushes Permanently damage your toolCleaning Dremel AccessoriesExtension Cords BearingsSmall Screw Mandrel N Screw Mandrel NEZ Lock Mandrel N High Speed CuttersCorrect IncorrectGrinding Wheel Sanding AccessoriesDrywall Cutting Bit Tile Cutting BitBefore each use, check to ! Warning make certain that all High Speed Cutters Speed SettingsEngraving Cutters Diamond Wheel PointsHigh Speed Router Bits Tungsten Carbide CuttersSilicon Carbide Grinding Stones blue/green Abrasive Wheels/PointsPolishing Accessories Cutting AccessoriesWire Brushes Chain Saw Sharpening StonesFinishing Abrasive Buffs FlapwheelsDetail Abrasive Brushes Drill BitSécurité électrique Sécurité du lieu de travailConsignes de sécurité pour outils rotatifs Utilisation et entretien des outils ÉlectroportatifsEntretien Consignes de sécurité pour outils rotatifs suite Le plomb provenant des peintures à base de plomb Avertissements supplémentaires concernant la sécuritéSymbole Nom Désignation/Explication SymbolesSymboles suite Grande Description fonctionnelle et spécificationsVitesse Modèle Outils rotatifs àBouton DE Blocage DE L’ARBRE AssemblageCapuchon Avant À CLÉ Intégrée EZ Twist Écrou DE Douille Anneaux ’IDENTIFICATIONInstructions Affûtage des outilsUtilisation de l’outil rotatif Modèle Vitesses de fonctionnementCertaines règles concernant la vitesse Nécessité de vitesses plus lentesBalais DE Charbon Renseignements sur l’entretienEntretien DES Balais Remplaçables Ressort DE BalaiNettoyage Accessoires DremelRallonges RoulementsMandrin à petite vis N Mandrin à vis NMandrin EZ Lock N Couteaux à grande vitesseAccessoires Dremel suite Meule Accessoires de ponçageEmbout mèche pour coupe de cloisons sèches Embout mèche pour coupe de carrelageAvertissement Avant chaque usage, vérifiez pour vous assurer Couteaux à coupe rapide Réglages de vitesseCouteaux à graver Pointes de meule en diamantRéglages de vitesse suite Accessoires de polissage Accessoires de coupePierres à affûter pour tronçonneuse a chaîne Brosses métalliquesTampons abrasifs de finition Meules à lamellesBrosses abrasifs de détail Embout foretGarantie limitée de Dremel ÉTATS-UNISCanada Seguridad del área de trabajo Seguridad eléctricaSeguridad personal Normas de seguridad para herramientas giratorias MecánicasServicio de ajustes y reparaciones Normas de seguridad para herramientas giratorias Advertencias de seguridad adicionales Símbolo Nombre Designación/explicación SímbolosSímbolos continuación Herramienta giratoria de alta Descripción funcional y especificacionesVelocidad modelos 100 y Velocidad modeloBoton DE Fijacion DEL EJE EnsamblajeAflojar Modelo 3000 solamenteDar forma a madera Instrucciones de utilizaciónVelocidades de funcionamiento Bloquea el flujo de aire y hace que el motor se recalienteModelo De control de pedal modelo Minuto aproximadas para el modelo 3000 deSe ha diseñado para Variable o de dos velocidadesServicio Información de mantenimientoEscobillas DE Carbono Tapa DE LALimpieza Accesorios para la DremelCordones de extensión RodamientosVástago de tornillo pequeño No Vástago de tornillo NoVástago EZ Lock No Cortadores de alta velocidadAccesorios Dremel IncorrectoCorrecto Muela Accesorios para lijarRuedas de corte Broca para cortar pared de tipo secoDM 2610015339 05-11DM 2610015339 05-11.qxp 5/12/11 941 AM Cortadores de alta velocidad Posiciones de velocidadCortadores para grabar Fresas con punta de diamanteBrocas de alta velocidad para fresar Cortadores de carburo de tungstenoPiedras de amolar de carburo de silicio verde/gris Ruedas abrasivas/pointesAccesorios de corte Piedras de afilar para sierras de cadenaAccesorios para pulir Escobillas de alambreDiscos de pulir abrasivos de acabado Ruedas de aletasCepillos abrasivos para detalles Broca taladradoraGarantía limitada de Dremel Estados UnidosCanadá Remarques Notas Dremel Limited Warranty United StatesCanada Outside

3000, 200, 100 specifications

The Dremel 100, 200, and 3000 rotary tools represent a significant evolution in the world of multi-tools, each offering unique features, technologies, and characteristics that cater to a variety of crafting and DIY enthusiasts.

The Dremel 100, one of the earlier models, is renowned for its simplicity and reliability. It boasts a powerful motor, which allows for a maximum speed of 35,000 RPM, making it ideal for tasks such as engraving, grinding, and polishing. Its ergonomic design ensures a comfortable grip, aiding in precision work. The tool is compatible with a wide range of Dremel accessories, providing versatility for various applications. However, it is primarily geared towards basic tasks, making it perfect for beginners or those who require straightforward functionality in their projects.

Moving on to the Dremel 200, this model builds upon the foundation of the 100 with additional features that enhance usability. It offers variable speed settings, allowing users to adjust the RPM between 15,000 to 35,000. This level of control is particularly beneficial for tasks that require finesse, such as detailed carving or delicate sanding. The 200 model's dual speed feature not only caters to a broader range of materials but also provides users with more flexibility. Its lightweight design and compact size make it easy to handle and maneuver, further enhancing user experience.

The Dremel 3000 takes innovation to the next level with its advanced design and features. This model incorporates a patented EZ Twist nose cap, which allows for easy accessory changes without the need for a wrench, significantly reducing downtime during projects. The 3000 model also includes a powerful motor capable of reaching speeds of up to 32,000 RPM. Its enhanced ventilation design prevents overheating during longer periods of use, making it ideal for tackling more extensive or persistent tasks. Additionally, the 3000 is compatible with all Dremel accessories and attachments, further expanding its versatility.

All three Dremel models embody a commitment to quality and versatility, proving invaluable tools for crafters and DIY enthusiasts alike. Whether you're a novice or a seasoned professional, the Dremel 100, 200, and 3000 offer the perfect combination of features and technologies to help you achieve exceptional results in your projects, ensuring you can create and innovate with confidence.
Top Page Image Contents