Cisco Systems SMNMADPTR manual Upgrading the NAM Helper Image NAM CLI

How to Install, Upgrade, or Downgrade NME-NAM-120S

DETAILED STEPS

	Command or Action	Purpose
Step 1
	Follow the steps described in Opening a	Initiate a console connection in the NME-NAM-120S. Log
	Session, page 10 to close the NAM console	in to the NAM CLI.
	session.
Step 2
	patch	Downloads and installs a software patch.
	ftp://user:password@host/full-path/filename	• Use the first option, which includes the password, if the
	or	FTP server does not allow anonymous users.
	patch ftp://user@host/full-path/filename	• If you use the second option, enter your password when
		prompted.
Step 3
	show patches	Displays all installed patches.
		Verify that your patch was successfully installed.
	Example:
	root@nam1.company.com# show patches
Step 4
	Follow the steps described in Closing a	Close the NAM console session.
	Session, page 11 to close the NAM console
	session.

Upgrading the NAM Helper Image (NAM CLI)

This section describes how to upgrade the NAM helper image stored on the NAM compact flash. The NAM must be running its application image for these steps to work.

SUMMARY STEPS

1.Download the NAM helper image from CCO and load it to an FTP server.

2.Open a session to the NAM CLI by following the steps in Opening a Session, page 10. (Login if prompted.)

3.upgrade < ftp-URL>

4.exit

5.Close the NAM session as described in Closing a Session, page 11.

Cisco Branch Routers Series Network Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0

OL-14942-02 17