Cisco Systems SMNMADPTR manual To the NAM and return to the Cisco IOS CLI, complete

Configuring the NME-NAM-120S For Network Connectivity

	Command or Action	Purpose
Step 3 At the password prompt, enter your password.		—
	or
	If you have not changed the password from the
	factory-set default, enter root as the root password.
	Example:
	Password: root
Step 4 Perform the tasks that you need to perform in the NAM		For help using NAM CLI commands, see the “Configuring
	CLI. When you want to end the Telnet or SSH session	the NME-NAM-120S for Management” section on page 21.
	to the NAM and return to the Cisco IOS CLI, complete
	Step 5 and Step 6.
Step 5
	exit	Leaves a subcommand mode.
		• Return to command mode.
	Example:
	root@localhost(sub-custom-filter-capture)# exit
	root@localhost#
Step 6
	logout	Logs out of the NAM system.
	Example:
	root@localhost# logout
	Connection closed by foreign host.

Examples

This section provides the following examples:

•Opening and Closing a Telnet Session to the NAM Using the NAM System IP Address, page 47

•Opening and Closing an SSH Session to the NAM Using the NAM System Hostname, page 48

Opening and Closing a Telnet Session to the NAM Using the NAM System IP Address

Router> telnet 172.20.105.215

Trying 172.20.105.215 ... Open

Cisco Network Analysis Module (NME-NAM-120S)

login: root

Password: <password>

Terminal type: vt100

Cisco Network Analysis Module (NME-NAM-120S) Console, 4.0

Copyright (c) 1999-2008 by cisco Systems, Inc.

WARNING! Default password has not been changed! root@nam.company.com# root@nam.company.com# logout

[Connection to 172.20.105.215 closed by foreign host] Router>

Cisco Branch Routers Series Network Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0

OL-14942-02 47