Cisco Systems SMNMADPTR manual Configuration Mode Command Purpose

Configuring the NME-NAM-120S For Network Connectivity

Table 3	Common Shutdown and Startup Commands
Configuration
Mode		Command	Purpose
Router#		service-module	Shuts down the network module
		integrated-service-engine slot/0 reload	operating system gracefully, then restarts
		(or for the NM-NAM)	it from the bootloader.
		service-module analysis-module
		slot/0 reload
Router#		service-module	Resets the hardware on a module. Use
		integrated-service-engines slot/0 reset	only to recover from shutdown or a failed
			state.
			Caution Use this command with
				caution. It does not provide an
				orderly software shutdown and
				consequently might impact file
				operations that are in progress.
Router#		service-module	Accesses the specified service engine and
		integrated-service-engine slot/0 session	begins a network module configuration
			session.
Router#		service-module	Shuts down the network module
		integrated-service-engines slot/0	operating system gracefully. Use when
		shutdown	removing or replacing a hot-swappable
			module during online insertion and
			removal (OIR).
Router#		service-module	Displays configuration and status
		integrated-service-engine slot/0 status	information for the network module
			hardware and software.
Router(config		shutdown	Shuts down the entire system (host router
)#			plus network module) gracefully.
ServiceEngine		boot	Starts the helper or application.
bootloader>
ServiceEngine		reboot	Shuts down NME-NAM-120S without
bootloader>			first saving configuration changes, then
			reboots it from the bootloader.
root@hostname		reboot	Gracefully reboots NME-NAM-120S
.domain			from the NAM CLI.
root@hostname		shutdown	Shuts down the NME-NAM-120S
.domain			application gracefully, then shuts down
			the module.

Cisco Branch Routers Series Network Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0

OL-14942-02 49