Cisco Systems SMNMADPTR Verify that you enabled the Cisco Express Forwarding, Correct interfaces

Configuring the NME-NAM-120S For Network Connectivity

	Command or Action	Purpose
Step 7
	end	Returns to privileged EXEC mode.
	Example:
	Router(config-if)# end
	Router#
Step 8
	show running-config	Displays the contents of the currently running configuration
		file.
	Example:	• Verify that you enabled the Cisco Express Forwarding
	Router# show running-config	switching path and enabled packet monitoring on the
		correct interfaces.

Examples

This section provides the following example:

•Enabling NAM Packet Monitoring, page 39

Enabling NAM Packet Monitoring

In the following example, NAM packet monitoring is enabled on the serial interfaces:

interface Serial 0/0

ip address 172.20.105.213 255.255.255.240 ip route-cache flow

speed auto full-duplex analysis-module monitoring no mop enabled

!

interface Serial 0/1

ip address 172.20.105.53 255.255.255.252 ip route-cache flow

duplex auto speed auto

analysis-module monitoring

!

interface Integrated-Service-Engine 2/0 ip address 10.1.1.1 255.255.255.0 hold-queue 60 out

!

What to Do Next

Proceed to the “Enabling and Accessing the NAM Traffic Analyzer” section on page 40.

Cisco Branch Routers Series Network Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0

OL-14942-02 39