Cisco Systems SMNMADPTR Open a Telnet or SSH session to the NAM. See, Enables the Http server

		Configuring the NME-NAM-120S For Network Connectivity
DETAILED STEPS
	Command or Action	Purpose
Step 1 Open a NAM console session from the router. See the		Accesses the NAM CLI.
	“Closing a Session” section on page 11.
	or
	Open a Telnet or SSH session to the NAM. See the
	“Opening and Closing a Telnet or SSH Session to the
	NAM” section on page 45.
Step 2
	ip http server enable	Enables the HTTP server.
	or	or
	ip http secure server enable	Enables the HTTP secure server (HTTPs).
	Example:
	root@localhost# ip http server enable
	Example:
	root@localhost# ip http secure server enable
Step 3
	Enter a web username.	Configures a web username.
	or	• The NAM requires at least one web username and
	Press Return to enter the default web username admin	password configuration.
		• If NAM does not prompt you for a web username and
	Example:	password, then at least one web username and password
		combination was previously configured.
	Please enter a web administrator user name
	[admin]: joeadmin
	Example:
	Please enter a web administrator user name
	[admin]: <CR>
Step 4
	Enter a password.	Configures a password for the web username.
	Example:
	New password: <adminpswd>
Step 5
	Enter the password again.	Confirms the password for the web username.
	Example:
	Confirm password: <adminpswd>

Cisco Branch Routers Series Network Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0

OL-14942-02 41