Schumacher SP3 owner manual Display Messages, Charging Aborted BAD Battery Yellow LED blinking

Page 13
• 13 •

12.DISPLAY MESSAGES

CONNECT CLAMPS (No LED lit) – Plugged into the AC outlet without the clamps connected to a battery.

WARNING CLAMPS REVERSED (no LED lit) – Plugged into the AC outlet and the clamps are connected backwards to a 6V or 12V battery. ANALYZING BATTERY (No LED lit) – Plugged into the AC outlet, and when first connected to a 6V or 12V battery correctly.

CHARGING 12V – XX% (Yellow LED lit) – Plugged into the AC outlet and correctly connected to a discharged 12V battery. CHARGING 6V – XX% (Yellow LED lit) – Plugged into the AC outlet and correctly connected to a discharged 6V battery. FULLY CHARGED AUTO MAINTAINING (Green LED lit) – Plugged into the AC outlet and correctly connected to a fully charged 6V or 12V battery.

CHARGING ABORTED BAD BATTERY (Yellow LED blinking)

13.MAINTENANCE INSTRUCTIONS

13.1After use and before performing maintenance, unplug and disconnect the battery charger (see sections 6, 7 and 8).

13.2Use a dry cloth to wipe all battery corrosion and other dirt or oil from the terminals, cords and the charger case.

13.3Ensure that all of the charger components are in place and in good working condition, including the plastic boots on the battery clips.

13.4Servicing does not require opening the unit, as there are no user-serviceable parts.

13.5All other servicing should be performed by qualified service personnel.

14. MOVING AND STORAGE INSTRUCTIONS

14.1Store the charger unplugged, in an upright position. The AC cord will still conduct electricity until it is unplugged from the outlet.

14.2Store inside, in a dry, cool place.

14.3Do not store the clips on or around metal, clipped together or clipped to cables.

14.4 If the charger is moved around the shop or transported to another location, take care to avoid/prevent damage to the cords, clips and charger. Failure to do so could result in personal injury or property damage.

Image 13
Contents Manual DEL Usuario Model / Modelo SP3Risk of Electric Shock or Fire Important Safety Instructions Save These InstructionsRisk of Explosive Gases Personal Precautions Risk of Explosive Gases Charger Location Risk of Explosion Contact with Battery Acid DC Connection Precautions Page Assembly Instructions Digital Display FEATURES/CONTROL PanelLED Display Operating InstructionsAmp Battery Clips Using the Quick-Connect Cable ConnectorsCharging Quick-Connect Cable with FuseCord Set with 12V Cigarette Adapter Battery Connection IndicatorDesulfation Mode Maintaining a BatteryAborted Charge Maintenance Instructions Charging Aborted BAD Battery Yellow LED blinkingDisplay Messages Moving and Storage InstructionsReplacement Parts Troubleshooting Problem Possible Cause REASON/SOLUTIONBefore Returning for Repairs For Repair or ReturnPage Do not Return this Product to the Store Year Limited Warranty Program Registration Producto EL Riesgo DE Descarga Eléctrica O Incendio Page Precauciones Personales Riesgo DE Gases Explosivos Riesgo DE Gases ExplosivosPage Page Precauciones DE Conexión EN CC Page Instrucciones DE Montaje Pantalla digital CARACTERÍSTICAS/PANEL DE ControlInstrucciones DE Operación Pinzas De Bateria De 50 Amps CargaCable de Conexión rápida c/Fusible Manteniendo una batería Indicador de conexión de la bateríaCarga anulada Modo de desulfataciónMuestra DE Mensajes Instrucciones Para EL Manejo Y Almacenamiento Instrucciones DE MantenimientoRepuestos Localización Y Solución DE Problemas Posible Causa SolutiónAntes DE Devolver a Reparaciones Page ¡NO LO Devuelva Este Producto a LA Tienda