Schumacher SP1 owner manual Risk of Electric Shock or Fire

Page 3

1.IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS -This manual contains important safety and operating instructions

RISK OF ELECTRIC SHOCK OR FIRE.

1.1Keep out of reach of children.

1.2Do not expose the charger to rain or snow.

1.3Use only recommended attachments. Use of an attachment not

recommended or sold by Schumacher® Electric Corporation may result in a risk of fire, electric shock or injury to persons or damage to property.

1.4To reduce the risk of damage to the electric plug or cord, pull by the plug rather than the cord when disconnecting the charger.

1.5An extension cord should not be used unless absolutely necessary. Use of an improper extension cord could result in a risk of fire and electric shock. If an extension cord must be used, make sure:

That the pins on the plug of the extension cord are the same number, size and shape as those of the plug on the charger.

That the extension cord is properly wired and in good electrical condition.

That the wire size is large enough for the AC ampere rating of the charger as specified in section 8.

1.6To reduce the risk of electric shock, unplug the charger from the outlet before attempting any maintenance or cleaning. Simply turning off the controls will not reduce this risk.

1.7Do not operate the charger with a damaged cord or plug; have the cord or plug replaced immediately by a qualified service person.

(Call customer service at: 1-800-621-5485.)

1.8Do not operate the charger if it has received a sharp blow, been dropped or otherwise damaged in any way; take it to a qualified service person. (Call customer service at: 1-800-621-5485.)

•2•

Image 3
Contents Model / Modelo SP1 Page Risk of Electric Shock or Fire Risk of Explosive Gases Personal Precautions Risk of Explosive GasesPage DC Connection Precautions Page Page Features Grounding and ac power cord connectionsOperating Instructions Assembly InstructionsAC Power Charging12V Accessory Plug Using The Quick-Disconnect Cable ConnectorsAmp Battery Clips Permanent Ring ConnectorsMaintaining a Battery Automatic Charging ModeDesulfation Mode Maintain Mode Float-Mode MonitoringCalculating Charge Time Maintenance InstructionsMoving and Storage Instructions Troubleshooting Problem Possible Cause REASON/SOLUTIONProblem Possible Cause REASON/SOLUTION Before Returning for Repairs Page Do not Return this Product to the Store Page Page Mail To Business Center DriveMount Prospect, IL Programa DE Registro DE 5-AÑOS DE Garantía Limitada Advertencia EL Riesgo DE Descarga Eléctrica O Incendio Precauciones Personales Riesgo DE Gases Explosivos Riesgo DE Gases ExplosivosPage Page Precauciones DE Conexión EN CC Page Page Conexiones a tierra y energía de CA LED Cargado CaracterísticasInstrucciones DE Montaje LED CargandoInstrucciones DE Operación CargaPinzas De Bateria De 50 Amps Carga anulada Conectores Permanentes De ArgollaEnchufe De 12 Volts Modo de carga automáticaManteniendo una batería Modo de desulfataciónFinalización de la carga Modo de mantenimiento Monitoreo a modo de flote13. Cálculo DE Tiempo DE Carga Instrucciones DE MantenimientoInstrucciones para el manejo y almacenamiento Localización Y Solución DE Problemas Posible Causa LED Carga Problema Posible Causa SoluciónAntes DE Devolver a Reparaciones Page Page LA Tienda