Schumacher SP1 owner manual

Page 5

home appliances. These batteries may burst and cause injury to persons and damage to property.

2.5NEVER charge a frozen battery.

2.6NEVER overcharge a battery.

2.7Consider having someone close enough by to come to your aid when you work near a lead-acid battery.

2.8Have plenty of fresh water and soap nearby in case battery acid contacts your skin, clothing or eyes.

2.9Wear complete eye and body protection, including safety goggles and protective clothing. Avoid touching your eyes while working near the battery.

2.10If battery acid contacts your skin or clothing, immediately wash the area with soap and water. If acid enters your eye, immediately flood the eye with cold running water for at least 10 minutes and get medical attention right away.

2.11If battery acid is accidentally swallowed, drink milk, the whites of eggs or water. DO NOT induce vomiting. Seek medical attention immediately.

3. PREPARING TO CHARGE

RISK OF CONTACT WITH BATTERY ACID. BATTERY ACID IS A HIGHLY CORROSIVE SULFURIC ACID.

3.1If it is necessary to remove the battery from the vehicle to charge it, always remove the grounded terminal first. Make sure all of the accessories in the vehicle are off to prevent arcing.

3.2Be sure the area around the battery is well ventilated while the battery is being charged.

3.3Clean the battery terminals before charging the battery. During cleaning, keep airborne corrosion from coming into contact with your eyes, nose and mouth. Use baking soda and water to neutralize the battery acid and help eliminate airborne corrosion. Do not touch your eyes, nose or mouth.

3.4Add distilled water to each cell until the battery acid reaches the level specified by the battery manufacturer. Do not overfill. For

•4•

Image 5
Contents Model / Modelo SP1 Page Risk of Electric Shock or Fire Risk of Explosive Gases Personal Precautions Risk of Explosive GasesPage DC Connection Precautions Page Page Features Grounding and ac power cord connectionsAC Power Assembly InstructionsCharging Operating InstructionsAmp Battery Clips Using The Quick-Disconnect Cable ConnectorsPermanent Ring Connectors 12V Accessory PlugDesulfation Mode Automatic Charging ModeMaintain Mode Float-Mode Monitoring Maintaining a BatteryCalculating Charge Time Maintenance InstructionsMoving and Storage Instructions Troubleshooting Problem Possible Cause REASON/SOLUTIONProblem Possible Cause REASON/SOLUTION Before Returning for Repairs Page Do not Return this Product to the Store Page Page Mount Prospect, IL Mail ToBusiness Center Drive Programa DE Registro DE 5-AÑOS DE Garantía Limitada Advertencia EL Riesgo DE Descarga Eléctrica O Incendio Precauciones Personales Riesgo DE Gases Explosivos Riesgo DE Gases ExplosivosPage Page Precauciones DE Conexión EN CC Page Page Conexiones a tierra y energía de CA Instrucciones DE Montaje CaracterísticasLED Cargando LED CargadoPinzas De Bateria De 50 Amps Instrucciones DE OperaciónCarga Enchufe De 12 Volts Conectores Permanentes De ArgollaModo de carga automática Carga anuladaFinalización de la carga Modo de desulfataciónModo de mantenimiento Monitoreo a modo de flote Manteniendo una bateríaInstrucciones para el manejo y almacenamiento 13. Cálculo DE Tiempo DE CargaInstrucciones DE Mantenimiento Localización Y Solución DE Problemas Posible Causa LED Carga Problema Posible Causa SoluciónAntes DE Devolver a Reparaciones Page Page LA Tienda