
P 7440 Edition 10
23
SERIES QS1L AND QS1T LEVER INLINE MOTOR AND GEARING
When Ordering, use applicable Part Number
Item | Parts Description | Part Number |
| Item | Parts Description | Part Number |
|
|
|
|
|
|
|
1 | Motor Housing |
| 22 | Rear End Plate Face Plate | ||
2 | Housing | 23 | Rear End Plate Assembly Retainer | |||
3 | Housing Screw | 24 | Cylinder Assembly |
| ||
4 | Reverse Valve Assembly |
|
| 25 | Cylinder Rear Alignment Pin | |
| for Models with an Automatic |
|
| 26 | Cylinder Front Alignment Pin | |
| Shutoff Valve | 27 | Rotor |
| ||
| for Models without an Automatic |
|
|
| for Models with an Automatic |
|
| Shutoff Valve |
| Shutoff Valve | |||
4A | Reverse Valve Seal |
| for Models without an Automatic |
| ||
5 | Throttle Plunger |
| Shutoff Valve | |||
6 | Back Cap | 28 | Vane Packet (set of 5 Vanes) | |||
6A | Warning Label (for direct drive models only) | 29 | Front End Plate Assembly |
| ||
7 | Back Cap Gasket | 30 | End Plate Alignment Pin | |||
8 | Muffler Element (3) | 31 | Front Rotor Bearing | |||
9 | Memory Chip (for models with |
|
| 32 | Motor Seal | |
| memory chip only) | 33 | Motor Clamp Washer | |||
10 | Throttle Lever | 34 | Push Rod (for Models with an |
| ||
11 | Throttle Lever Pin |
| Automatic Shutoff Valve) | |||
12 | Throttle Valve Seat | 35 | Gear Retainer | |||
13 | Throttle Valve | 36 | Gear Head Spacer | |||
14 | Throttle Valve Spring | 37 | Planet Gear Head Drive Plate (for Series |
| ||
15 | Exhaust Diffuser |
| QS1L28 and QS1T28) | |||
16 | Inlet Bushing Assembly |
|
| 38 | Planet Gear Head Assembly (includes gear shafts) |
|
| for |
| for Series QS1L02, QS1T02 QS1L05, |
| ||
| for |
| QS1T05, QS1L10,QS1T10, QS1L28 |
| ||
17 | Inlet Bushing Seal |
| and QS1T28 | |||
18 | Inlet Screen |
| for Series QS1L17, QS1T17, |
| ||
19 | Reverse Lever |
| QS1L20C and QS1T20C | |||
20 | Automatic Shutoff Valve (for all Models with |
|
|
| for Series QS1L20S, QS1T20S and |
|
| a Shutoff Clutch and Lever Permit Models |
|
|
| QS1L20D | |
| with a Cushion Clutch) |
|
|
| ||
21 | Rear End Plate Assembly (includes |
|
|
|
|
|
| rear rotor bearing) |
|
|
|
Continued to next page