Ingersoll-Rand QS1L Lubrication, Installation, Ingersoll-Rand No Gearing Clutch, Dwg. TPD905-2

LUBRICATION

Ingersoll-Rand No. 10	Gearing:
	Ingersoll-Rand No. 67
	Clutch:
	Ingersoll-Rand No. 28

Always use an air line lubricator with this tool.

We recommend the following Filter-Lubricator-Regulator Unit:

Inside USA use FRL unit #C28-04-FKG0-28 Outside USA use FRL unit #C28-C4-FKG0

Whenever the tool is disassembled for maintenance or repair, lubricate the gear train with Ingersoll-Rand No. 67 Grease.

Whenever the tool is disassembled for maintenance or repair, lubricate the clutch assembly with Ingersoll-Rand No. 28 Grease.

INSTALLATION

Main Line(s) Inner Ø			Branch Line(s) Inner Ø
to be 3X Size of			to be 2X Size of
Air Tool's Inlet Ø			Air Tool's Inlet Ø
To Air
System
To Air
Tool
Emergency	L	R	F
Shut-Off
Valve
Lubricator	Regulator		Filter
		FRL

Drain Regularly

Compressor

(Dwg. TPD905-2)

SAVE THESE INSTRUCTIONS. DO NOT DESTROY.

When the life of the tool has expired, it is recommended that the tool be disassembled, degreased and the parts be

separated by material so that they can be recycled.

4 P7440 Edition 10