Baldor mn1854 manual Copies one program to another within the LinStep+

Note: If a menu has more than three options, arrows on both sides of the display indicate that more options are available. Press the appropriate arrow key to display one option at a time. To exit a menu without making a selection, or to back up one menu level, press ESC.

Table 4-1

					Menu Key
		RUN		EDIT	HELP	COPY	DEL
	PROG (F1)		PROG (F1)		In Main Menu:	PROGRAM (F1)	Deletes an entire
	Run programs by		Edit or write		Provides help on	To copy programs	program or in
	name or number.		programs.		the function of	within a control	editor deletes
					RUN, EDIT, or	(source file>	characters
					COPY.	destination file)
	JOG (F2)		SETUP (F2)		In Menus:	TO PAD (F2)
	Jog either axis at		Configure system		Provides help on	To upload data
	low or high		components and		menus.	from control’s
	speeds.		operating limits.			memory to the
	Press F1 or F2,					keypad.
	and
	any arrow key
Menu	(←↑↓→	).
Options	TEST (F3)		POS (F3)		In Sub–Menus:	FROM (F3)
	Run programs in		Reset axis		Explains setup	To download data
	trace mode, do		position to zero?		choices.	from keypad
	amplifier		YES	NO		memory to a
	shutdown and		(F1)	(F3)		control.
	reset, and test
	outputs or moves.
			LIST (↓ ) (F1)		In Editor:
			Directory of		Provides
			stored programs,		command
			memory usage		descriptions.
			and available
			space

RUN

Press RUN to start a program, Jog an axis, or access Test/Debug functions.

EDIT

Press Edit to change setup parameters and programs, list programs, & reset position counter.

HELP

Provides help information for keys, menus, and command syntax.

COPY

Copies one program to another within the LinStep+.

DEL

Deletes characters in the editor, or deletes entire programs from memory.

0–9

Enters numbers. Used with ALPHA key to enter characters. Used with F1, F2, F3 keys to select commands in the program editor.

ESC

Press ESC to stop a program or to move back one menu level. In program editor, it saves the program and exits the editor.

4-2Keypad Operation MN1854