P 15/ 37
Repair
[3]DISASSEMBLY/ASSEMBLY
[3]-3. Safety lock mechanism
ASSEMBLING
(1)Assemble Safety lock mechanism as illustrated in Fig. 32.
(2)Adjust the position of Lock lever as illustrated in Fig. 33.
Fig. 32
Insert Rod 8 into Rod holder, and set Rod holder to Blade case.
Stop ring 
rod 8
While pushing Rod holder toward the rib of Blade case, secure Rod holder with 4x16 Tapping screw (2pcs.). And assemble Torsion spring 8.
rib of | 4x16 Tapping |
Blade case | screw (2pcs.) |
Pretighten M4x10 Pan head screw (2pcs.) to fasten Lock lever and Rod 8.
M4x10 Pan
head screw (2pcs.)
Lock lever
Rod 8
Rod holder | Blade case | Torsion spring 8 |
Fig. 33
Lock lever
Safety cover B
After leaving a 2 up to 3mm clearance between Lock lever and Safety cover B, secure Lock lever by tightening M4x10 Pan head screw (2pcs.).
Lock lever