P 22/ 37
Repair
[3] DISASSEMBLY/ASSEMBLY
[3]-12. Laser Mechanism (for LS1016L only)
DISASSEMBLING
Note:
1)As shown in Fig. 13, remove 4x18 Tapping screw and Lead cover holder.
Then disconnect Connectors of Laser circuit from that of Power supply cord, and remove Lead cover.
2)Remove Protector, M5x24 Thumb screw and Flat washer 5. (Fig. 62)
3)Remove one of two CT4x16 Tapping screw on Laser cover. While expanding Laser cover using Slotted screwdriver to remove two hooks of Laser cover from Blade case and pick up the tail of Laser cover as shown in Fig. 63.
4)Remove M5 Shoulder screw using thin slotted screwdriver. Laser mechanism can be pulled up. (Fig. 64)
5)Remove Compression spring 6 from Laser mechanism. (Fig. 65)
6)Remove M3x6 Pan head screw A and separate Torsion spring 9 (A). Remove M3x6 Pan head screw B and separate Torsion spring B. (Fig. 66)
Fig. 62
M5x24 Thumb screw
Protector
Flat washer 5
CT4x16 Tapping 
screw
Note: No need to
loosen the screw in this step.
CT4x16 Tapping screw
Flat washer 5
Fig. 63
Tail of
Laser
cover
slotted screwdriver
Hooks of Laser cover
Fig. 64
Laser 
mechanism
M5 Shoulder screw
Fig. 65
Compression spring 6
Fig. 66
Laser circuit complete
Torsion spring 9 (A)
Block C | M3x6 Pan head screw (B) |
| |
Torsion spring 9 (B) Block B | M3x6 Pan head screw (A) |