P 33/ 37
Wiring diagram
Fig. D-2A
Wiring in Motor Housing and Handle for Argentina and
220 - 240V area where Radio interference suppression is required.
Field lead wires have to be tightened in the Motor housing so as not to touch Armature.
Terminal block
Controller
Field lead wire (white) |
|
Field lead wire (purple) | Field lead wires |
| * (orange) |
Do not route Field lead wires | * (black) |
(white and purple) between | * (yellow) |
Armature and Baffle plate. |
|
Pass the Lead wires from Motor housing through this notch of Handle.
rib
case of Power | rib for Laser |
supply circuit | switch unit |
Pass Lead wires through ribs as |
|
|
|
| |
illustrated. |
| Switch for protection | |||
Do not put Lead wires on ribs. |
| ||||
| of brake coil | ||||
|
|
|
|
|
|
|
|
|
|
| |
| Connection of Receptacles |
|
|
| |
|
|
|
|
|
|
The Receptacles have to be connected so that their wire connecting portions face the bottom of Handle.
Receptacles
Bottom of Handle | Wire connecting portion |