Makita LS1016L dimensions Disassembly/Assembly

P 12/ 37

Repair

[3] DISASSEMBLY/ASSEMBLY

[3]-2. Gear section (Spiral bevel gear 32, Helical gear 14, Helical gear 27, Helical gear 28) (cont.)

DISASSEMBLING

(6)Helical gear 28 and Spindle can be disassembled as illustrated in Figs. 25.

Fig. 25

Disassemble Ball bearing 608DDW with 1R269. And remove Retaining ring S-15 from Spindle with 1R291.

Receiving Ball bearing 6002DDW with the table of Arbor press, press down Spindle with Arbor press.

1R269

Ball bearing 608DDW

1R291

Helical gear 28

Retaining ring S-15

Spindle

Ball bearing 6002DDW Spindle

Bearing box

ASSEMBLING

(1)Assemble Helical gear 28 section to Bearing box as illustrated in Fig. 26. And then, assemble Retaining ring S-15 and Ball bearing 608DDW to Spindle. Refer to Fig. 25.

(2)Assemble Helical gear 27 section to Bearing box as illustrated in Fig. 27.

Fig. 26

Ball bearing 6002DDW

Helical gear 28

1R232

Spindle

Bearing box	Rim portion has
	to be faced to
	Bearing box side.
	1R036

Fig. 27

Assemble Helical gear 27, Ball bearing 6000ZZ and Steel ball 4 to Gear shaft. And then, assemble the Helical gear 27 section to Bearing box.

Convex side

The convex side has

to be faced to Gear shaft end on which Steel ball 4 is mounted.

Steel ball 4	Helical
Gear shaft	gear 28

Helical

gear 27

Ball bearing 6000DDW