Makita LS1016L dimensions Fig. D-2E

Page 35

P 35/ 37

Wiring diagram

Fig. D-2E

Wiring in Motor Housing and Handle for 110 - 127V area other than UK

Field lead wires have to be tightened in Motor housing so as not to touch Armature.

Insulated Terminal

Do not put Lead wires on these ribs.

Controller

Field Lead wires * (orange)

*(black)

*(yellow)

rib

Case of Power	ribs for Laser
Supply Circuit	switch unit

Pass Lead wires from Motor housing through the notch of Handle.

Pass Lead wires through ribs as illustrated.

Do not put their Lead wires on the ribs.

Image 35

Contents Standard equipment SpecificationOptional accessories Cutting Capacities Repair Necessary Repairing ToolsRepair Lubrications Spiral bevel gear 32 80 Helical gear Disassembling Repair DISASSEMBLY/ASSEMBLY 3-1. Blade case, Motor sectionCorrect Wrong Blade case, Motor sectionAssembling DISASSEMBLY/ASSEMBLY DISASSEMBLY/ASSEMBLY DISASSEMBLY/ASSEMBLY DISASSEMBLY/ASSEMBLY DISASSEMBLY/ASSEMBLY Safety lock mechanism 3mm Safety cover B Repair DISASSEMBLY/ASSEMBLY 3-4. Safety cover a Turn Base, Base Positive lock mechanism of Turn base Stopper pin Assembling of Square rod completeArm complete, Arm holder Front arm sectionStopper Laser Mechanism for LS1016L only Lower-slide lock mechanism AdjustmentBlade Guide fenceLaser for LS1016L only Adjustment Handle section Circuit diagramMotor housing Handle coverUK 110V only Handle cover Handle sectionArgentine Fig. D-1D 110-127V area except UK Inside of Case Outside of Case Wiring diagramFig. D-2A Fig. D-2D Fig. D-2E Wiring in Motor housing and Handle for UK Laser circuit section viewed from front side