Disassembly/Assembly | Makita LS1016L instruction

P 11/ 37

[3] DISASSEMBLY/ASSEMBLY

[3]-2. Gear section (Spiral bevel gear 32, Helical gear 14, Helical gear 27, Helical gear 28) (cont.)

(4)Spiral bevel gear 32 and Helical gear 14 can be disassembled as illustrated in Figs. 22 and 23.

Fig. 22

Rubber washer 12

Woodruff key 4

1.Remove Ball bearing 608DDW with 1R269 from the shaft of Helical gear 14.

2.Remove Retaining ring S-12 with 1R291 from the shaft of Helical gear 14.

Flat washer 12

Spiral bevel gear 32

Unscrew 4x12 Tapping screws and remove Grease holder from Bearing box.

4x12

Tapping screw

Grease holder

Fig. 23

1R045

Ball bearing 608DDW

1R346

Shaft of

Helical gear 14

Ball bearing 608DDW can be removed by pressing from Grease holder side to Bearing retainer side.

Ball bearing 608DDW

(5)Helical gear 27 and Gear shaft can be disassembled as illustrated in Fig. 24.

Fig. 24

Disassemble Helical gear 27 from Bearing box.

Remove Ball bearing 6000ZZ from Gear shaft with 1R269. And then, take out Steel ball 4 from the Gear shaft.

Putting the Helical gear 27 on 1R217, remove Gear shaft by pressing with arbor press.

Steel ball 4

Helical gear 27

1R217 Gear shaft